Megger MFT1835 Electrical Tester

  • RS-stocknr. 704-0487
  • Fabrikantnummer 1002-415
  • Fabrikant Megger
Datasheets
Wetgeving en conformiteit
Vrijgesteld
Land van herkomst: GB
Productomschrijving

Megger MFT1800 Series

Multifunction tester for electrical installation testing in accordance with VDE 0100
2-wire no-trip & high current loop impedance testing
Auto-start tests on continuity and loop resistance
Simultaneous display of loop resistance and fault current results
Dual test buttons for left or right-handed operation
Switched probe for ease of use
Weatherproof to IP54
Input protection against accidental connection to live circuits
CAT IV 300V safety standard

Note

German version

Specificaties
Kenmerk Waarde
Loop Impedance Test Type 2 Wire
Automatic RCD Test Yes
RCD Ramp Test Yes
Non-Tripping Yes
Insulation Test Voltage 100 V, 250 V, 500 V, 1000 V
Maximum Voltage Measurement 600V
Test Type Continuity, Wiring Polarity
Earth Resistance Measurement Yes
Downloadable Data Yes
Interface Type German Mains
Continuity Test Current 15 mA, 200 mA
RCD Test Type AC Type, DC Selective
Test Standards BS 7671, IEC 60364, IEC 61010-031, IEC 61010-1, IEC 61010-30, IEC 61557, VDE 0100
Minimum Continuity Resistance 0.01Ω
Minimum Operating Temperature -10°C
Weight 1kg
Safety Category Voltage 300 V, 600 V
Safety Category Level CAT III, CAT IV
Maximum Operating Temperature +55°C
Model Number p MFT1835
Display Type LCD
Safety Category CAT III 600 V, CAT IV 300 V
Maximum Continuity Resistance 9.99Ω
Power Source Battery
Battery Type AA
IP Rating IP54
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 24/10/2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
1.625,00
(excl. BTW)
1.966,25
(incl. BTW)
Aantal stuks
Per stuk
1 +
1.625,00 €
Related Products
Using FieldSense Technology the T6-1000 measures voltage up ...
Description:
Using FieldSense Technology the T6-1000 measures voltage up to 1000 V ac through the open fork, without test lead contact to live voltage.+ Without opening covers or removing wire nuts. On wires up to AWG 4/0 (120 mm2), carrying as ...
This exclusive 2 piece kit from our trusted ...
Description:
This exclusive 2 piece kit from our trusted and highly reliable RS PRO range includes the RS PRO multifunction electrical tester along with the RS PRO Bluetooth clamp meter. These two devices are essential in order to verify the safety ...
Master package PROFiTEST INTRO, consisting of PROFiTEST INTRO ...
Description:
Master package PROFiTEST INTRO, consisting of PROFiTEST INTRO M520T, Test probe with remote release Z550A, Vario-Plug-Set Z500A, Set-Probes Z50F, PROSchuko-Measuring-Adapter Z503K, PRO-Jumper Z503J, SORTIMO L-BOXX Z503D, Foam SORTIMO L-BOXX Z503O, Battery Pack Master Z502H and chargerZ502R. Measurement of RLO, ...
Fluke 1650 series testers verify the safety of ...
Description:
Fluke 1650 series testers verify the safety of electrical installations in domestic, commercial and industrial applications.They allow electrical wiring to be certified to the new standard NF C 1500.These devices combine simplicity, efficiency, ruggedness and ergonomics to represent a new ...