Megger MFT1741 Electrical Tester RS Calibration

  • RS-stocknr. 172-0820
  • Fabrikantnummer 1009-986
  • Fabrikant Megger
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

The MFT1741 multifunction tester has been designed for testing low voltage electrical installations, particularly in locations that suffer from high electrical noise. It provides all the tests required to complete the necessary electrical certification for industrial, commercial and domestic fixed wiring installations. Overlaying the new non-trip loop impedance measurement is the new “confidence meter”. As loop impedance values can be dramatically affected by circuit noise, the Confidence Meter displays the degree of confidence in the accuracy of the measured loop impedance.

Enhanced non-trip loop impedance measurement technology
“Confidence meter” measurement analysis (patent pending)
Full single and 3 phase compliant installation testing
10 mA to 1 A single and 3 phase RCD testing
Simple colour-coded test selection
Ambidextrous operation

Specificaties
Kenmerk Waarde
Calibrated RSCAL
Loop Impedance Test Type 2 Wire (Hi Current), 2 Wire (Non-Trip Range), 3 Wire (Non-Trip Range)
Automatic RCD Test Yes
RCD Ramp Test Yes
Non-Tripping Yes
Insulation Test Voltage 100 V, 250 V, 500 V, 1000 V
Maximum Voltage Measurement 600V
Test Type Auto Test, Continuity, Earth Resistance, Insulation, Loop Test, RCD Ramp Test, RCD Test, Resistance
Earth Resistance Measurement Yes
Downloadable Data Yes
Interface Type Bluetooth
Continuity Test Current 15 mA, 200 mA
RCD Test Type A, AC, B, DC, S
Test Standards EN 61010, IEC 61326
Battery Type AA, NiMH
Dimensions 390 x 220 x 285mm
Safety Category CAT III 600 V, CAT IV 300 V
Minimum Continuity Resistance 0.01Ω
Display Type Backlight
IP Rating IP54
Maximum Operating Temperature +55°C
Power Source Battery, Mains
Minimum Operating Temperature -10°C
Height 285mm
Width 220mm
Model Number p MFT1741
Weight 1 (with Battery & Case)kg
Safety Category Level CAT III, CAT IV
Length 390mm
Plug Type BS 1363
Maximum Continuity Resistance 99.9kΩ
Safety Category Voltage 300 V, 600 V
5 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
2.055,00
(excl. BTW)
2.486,55
(incl. BTW)
Aantal stuks
Per stuk
1 +
2.055,00 €
Related Products
Powersuite Professional Contractor offers all the features of ...
Description:
Powersuite Professional Contractor offers all the features of PowerSuite Lite with the addition of a data based client, assets and results management database for managing 17th Edition electrical and Portable Appliance test results. All records and downloaded data is allocated ...
Meggers padded carry case for use with MFT1700 ...
Description:
Meggers padded carry case for use with MFT1700 and MT1800 series of testers. Manufactured from a hard wearing nylon fabric, featuring a main compartment, pocket under the lid for test leads and an external pocket for cables and accessories. • ...
The PROFITEST MXTRA Starter Pack Kit consists of ...
Description:
The PROFITEST MXTRA Starter Pack Kit consists of the M520P test insrument along with a VARIO plug adapter set, F2000 universal carrying pouch, rechargeable battery pack and battery charger. Loop and line impedance measurement Measurement of insulation resistance using nominal ...
The PROFITEST XTRA M500Y Profi PackageInstallation Test Kit ...
Description:
The PROFITEST XTRA M500Y Profi PackageInstallation Test Kit comprises a M520P test instrument along with a VARIO plug adapter set, E-Clip 2 generator clamp for earthing measurements, Z3512A clamp for earthing measurements, PRO RE2 measuring adapter for 2-clamp measuring methods, ...