28mm Tin Coated Stainless Steel Earth Bonding, 0 → 4 mm Thickness

  • RS-stocknr. 720-0664
  • Fabrikantnummer 80926-01
  • Fabrikant Glenair
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Earth Bond

The Glenair® Earth Bond offers a reliable way of allowing attachment to metallic structures when used with the hydraulic setting tool. It is a method of electrical grounding that is widely used in Industries such as Automotive, Railway, Military Vehicles, and Rolling stock. An Equipotential bond is created and it is suitable where lightning strike protection is required, for EMC where low resistance electrical connections must be maintained. The Earth terminal can be used in hazardous area where a naked flame is not allowed. Ideal for applications where there is no access behind a structure as it can be installed from the one side.

Requires no welding, cleaning and is suitable for use on uneven surfaces
Manufactured with non-corroding materials
Consistent low electrical resistance connection
Produces a high strength joint
Available for Steel and Aluminium plates ranging from 1.5-4mm thickness

Note

The Earth Bonding system has been independently tested by the Defence Evaluation and Research Agency (DERA)

Approvals

ENV1,ENV2,ENV5 Certificate number 02 / 00022. The Earth Bonding system has been approved for use by the Ministry of Defence, Warship Support agency and is NATO codified.

Note

For use with RS 7200689 PMT10 Setting tool

Standards

ENV1,ENV2,ENV5 Certificate number 02 / 00022

Glenair® Earth Bonding System

The Glenair® Earth Bonding System offers a reliable way of allowing attachment to metallic structures .It is a method of electrical grounding that is widely used in Industries such as Automotive, Railway, Military Vehicles, and Rolling stock. An Equipotential bond is created and it is suitable where lightning strike protection is required, for EMC where low resistance electrical connections must be maintained. The Earth terminal can be used in hazardous area where a naked flame is not allowed. Ideal for applications where there is no access behind a structure as it can be installed from the one side.

Requires no welding, cleaning and is suitable for use on uneven surfaces
Manufactured with non-corroding materials
Lightweight hydraulic setting tool
Consistent low electrical resistance connection
Produces a high strength joint
Available for Steel and Aluminium plates ranging from 1.5-4mm thickness

Specificaties
Kenmerk Waarde
Rivet Length 28mm
Rivet Body Material Copper
Mandrel Material Stainless Steel
Finish Tin Coated
Thickness of Material Maximum 4mm
Thickness of Material Minimum 0mm
340 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 20)
13,413
(excl. BTW)
16,23
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
20 - 80
13,413 €
268,26 €
100 - 180
13,145 €
262,90 €
200 - 480
12,81 €
256,20 €
500 - 980
12,34 €
246,80 €
1000 +
11,804 €
236,08 €
*prijsindicatie
Related Products
Our range of Rivet Nuts from Bollhoff are ...
Description:
Our range of Rivet Nuts from Bollhoff are a multipurpose solution for adding a load carrying internal or external thread to a thin work piece, and can be installed into plastic and all metals. To build desk framesAllows for full ...
Two-part construction, re-useable, and require no fixing toolsSuitable ...
Description:
Two-part construction, re-useable, and require no fixing toolsSuitable for a wide range of light-duty fixing applicationsVarious sizes available to cover a panel thickness/gripping range of 1 to 8·5mmMade from nylon 6, available in Black or WhiteWorking temperature range -40°C to ...
Standard open type domed head rivet, with large ...
Description:
Standard open type domed head rivet, with large flange Suited to weaker and/or thinner materials Aluminium alloy body, carbon steel mandrel.
Suitable for use with a wide range of ...
Description:
Suitable for use with a wide range of materials such as wood, metal, plastic etcLight in weight, with good insulating properties and chemical resistanceRivet body made from nylon, mandrel from polycarbonateColour coded to indicate material grip/thickness range.