Megger 1010-518 Current Clamp, For Use With MVC1010

  • RS-stocknr. 183-9466
  • Fabrikantnummer 1010-518
  • Fabrikant Megger
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

The current probe is designed for measurements of AC currents up to 1000 A with a 1000:1 step-down ratio. The probe offers excellent accuracy (0.3% error at full range) and small phase shift (0.7° at full range) so it can be used for metering of power, energy and power quality applications. Such high performance is achieved because the magnetic cores are made from high-permeability FeNi alloy. The rated terminating resistance (burden) of 1 Ω must be provided by the instrument connecting to MCC1010 and MVC1010. The output terminals are protected with a voltage limiting circuit ensuring a safe-to-touch voltage under all rated conditions.

CAT IV 600 V current measurement to 1000 A AC
1 mA/1 A sensitivity with rated burden of 1 Ω
Large jaws for cables up to 52 mm
Overvoltage protection of the output terminals
Suitable for leakage currents

Specificaties
Kenmerk Waarde
Accessory Type Current Clamp
For Use With MVC1010
Calibrated RSCAL
1 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
419,70
(excl. BTW)
507,84
(incl. BTW)
Aantal stuks
Per stuk
1 +
419,70 €
Related Products
The i30 may be used in conjunction with ...
Description:
The i30 may be used in conjunction with bench and portable oscilloscopes for accurate non-intrusive ac & dc current measurement.,Applications include: inverters, switch mode power supplies, industrial controllers, automotive leakage currents and other applications requiring accurate isolated current measurement. ...
Suitable for use with oscilloscopes, recorders and data ...
Description:
Suitable for use with oscilloscopes, recorders and data loggers a.c. coupled output (no d.c. offset) Voltage output of 3V full scale for each range Fits around conductors up to 160mm diameter Extended battery life and external power supply input Meets ...
Megger Duplex probe 1 connect handspike with sprung ...
Description:
Megger Duplex probe 1 connect handspike with sprung loaded tips fitted with a connector socket for easy connection to any connector test lead. Replaceable probe tips have hardened needle points, gold plated for excellent low-resistance contact. Tips are sprung to ...
Kits for performing tests required by NF C ...
Description:
Kits for performing tests required by NF C 15-1001 DT-170 (differential controller)1 DT-300 (earth and continuity measuring device and extension cord)1 M-9955538 (diagnostic book 15-100)1 DT-500* (Insulation controller and connectors).