- RS-stocknr.:
- 437-2810
- Fabrikantnummer:
- 8AFKJAE6FT/H50T
- Fabrikant:
- Interroll
- RS-stocknr.:
- 437-2810
- Fabrikantnummer:
- 8AFKJAE6FT/H50T
- Fabrikant:
- Interroll
Datasheets
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- DE
Productomschrijving
Interroll Motorised Drive Roller
The Interroll BT100 series motorised driver roller has a length of 450mm and a diameter of 50mm. This electrically driven roller has a gear ratio of 21:1 and spindle thread size is M8. It replaces external components such as motors and gears that require frequent maintenance. This device can be used in dusty and/or moist environments. Additionally, the roller is powered by a brushed, mechanically commutated 24VDC motor.
Note:
Should not be used with Thyristor controlled power supply units.
Note:
Should not be used with Thyristor controlled power supply units.
Features and Benefits
Grooved to provide the drive to 9 slave rollers
Bush type motor
Quiet running with a noise level of approximate 47dB(A)
Service life of approximate 6000 operating hours (effective running time)
15 starts/stops per minute
Bush type motor
Quiet running with a noise level of approximate 47dB(A)
Service life of approximate 6000 operating hours (effective running time)
15 starts/stops per minute
Certifications
IP54 rated
Specificaties
Kenmerk | Waarde |
---|---|
Roller Diameter | 50mm |
Roller Length | 600mm |
Component Type | Motorised Drive Roller |
Load Capacity | 100kg |
Ratio | 21 |
Spindle Thread Size | M8 |
Maximum Conveying Speed | 24m/min |
Maximim Motor Voltage | 30V |
Minimum Motor Voltage | 18V |