Bosch HSS 9mm Twist Drill Drill Bit, 125 mm Plain Shank

  • RS-stocknr. 768-3194
  • Fabrikantnummer 2608585896
  • Fabrikant Bosch
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: CN
Productomschrijving

Bosch HSS-Co Cobalt Drill Bits (DIN 338)

Introducing the series of HSS-Co (Cobalt) Drill Bits from Bosch. These high-performance drill bits are manufactured from alloyed high-speed steel to DIN 338 with 5% cobalt content making them resistant to heat and wear, making them ideal for use in tough and hard steels. The HSS-Co drill bits enable up to 40% faster drilling rates and 50% lower feed pressure than standard HSS bits, with a chisel edge and split point drill tip manufactured to DIN338. The bit's exposed 135-degree self-centring split-point tip combines active cutting and perfect centring without wandering, delivering maximum precision. The split-point tip also eliminates any need to pre-punch or pilot drill for up to 10 mm. These drills are ideal for use with pillar drills and drill stands.

Features and Benefits:

• Features self-centring split-point for excellent positional accuracy and hole quality
• 135° point angle design for maximum accuracy of application
• No pre-punch or pilot required
• Precision ground for a faster drilling rate and lower feed pressure
• Spiral helix enables rapid swarf removal
• Suitable for drilling in alloyed and non-alloyed steel up to tensile • strength of 1000N/m2
• Suitable for both hand and machine use

Approvals & Certification:

• DIN338/1414
• Bosch Standard Quality

Typical Applications:

These bits are ideal for fast drilling of a plug, anchor or clearance holes in a number of materials such as steel, plastic, wood, metal etc. This makes it an essential piece of kit to have if you work within the carpentry/construction/engineering industries to save time and money on being able to perform more efficiently when working with stubborn materials.

FAQs:

Can these drill bits be used with any SDS drill?
No, they are standard drills, will not fit into SDS chuck

What does jobber mean?
The word jobber specifies the length of the drill bit. This generally means the length of the entire drill bit itself is significantly longer for diameter it has. As an example, a mechanic drill bit will have a much shorter flute and therefore have a much smaller overall length.

What are HSS and HSS-Co?
An acronym for High-speed steel, HSS is generally the go-to type of steel needed for drill bits due to their excellent heat resistance at high speeds. The HSS-Co (cobalt) drills bits are manufactured with the addition of 5% cobalt content that increases heat resistance and wears making them ideal for use with tough and hard steels.

Specificaties
Kenmerk Waarde
Drill Bit Type Twist Drill Bit
Diameter 9mm
Material HSS
Overall Length 125 mm
50 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
10,334
(excl. BTW)
12,504
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
10,334 €
51,67 €
*prijsindicatie
Related Products
High speed titanium nitride coated jobber drill bits, ...
Description:
High speed titanium nitride coated jobber drill bits, suitable for a multitude of jobs and materials feature a longer shaft compared to other standard drill bits and can be used in both hand and machine drills. Suitable for drilling metal, ...
Titanium Nitride coated HSS, split point jobber drills ...
Description:
Titanium Nitride coated HSS, split point jobber drills for accurate and efficient cutting. 118° split point design for better centeringTiN coating for low friction and increased cutting speedsSuitable for both hand and machine use.
Precision ground twist drill bit manufactured to DIN ...
Description:
Precision ground twist drill bit manufactured to DIN 338Heat and wear resistance propertiesRight hand cutting helix, type N flute5% cobalt alloyed High Speed SteelUnique tip improves efficiency and eliminates walking Excellent for use with Stainless Steel.
Introducing the Extreme DT49 series, this is a ...
Description:
Introducing the Extreme DT49 series, this is a metal drill from Dewalt capable of drilling through Stainless Steel. This drill bit is superior compared to others, due to an 8% cobalt content to maintain a sharper cutting edge delivering 4 ...