EXACT 3-Piece Step Drill Bit Set for Metal, 30mm Max, 4mm Min, HSS Bits
- RS-stocknr.:
- 508-9165
- Fabrikantnummer:
- 05331
- Fabrikant:
- EXACT
8 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs 1 set
€ 147,93
(excl. BTW)
€ 179,00
(incl. BTW)
| Set(s) | Per set |
| 1 + | € 147,93 |
- RS-stocknr.:
- 508-9165
- Fabrikantnummer:
- 05331
- Fabrikant:
- EXACT
Datasheets
Wetgeving en conformiteit
N.v.t.
- Land van herkomst:
- DE
Productomschrijving
Step drill, straight tap
HSS step drill with straight tap, two-edged
For burr-free drilling and planing sheet metal, pipes and profiles
No centre-punching necessary, drill bits do not run
Suitable for construction steel, CrNi steel, non-ferrous metals, Plexiglas, plastics and wood up to 6 mm thick
Diameter specification is lasered on every level
Three-faced driving shaft, prevents slipping in the drill chuck
Sets delivered in a plastic case
For burr-free drilling and planing sheet metal, pipes and profiles
No centre-punching necessary, drill bits do not run
Suitable for construction steel, CrNi steel, non-ferrous metals, Plexiglas, plastics and wood up to 6 mm thick
Diameter specification is lasered on every level
Three-faced driving shaft, prevents slipping in the drill chuck
Sets delivered in a plastic case
Specificaties
Kenmerk | Waarde |
|---|---|
| Drilling Application | Metal |
| Drill Bit Type | Step Drill Bit |
| Material | HSS |
| Number of Pieces | 3 |
| Minimum Size | 4mm |
| Maximum Size | 30mm |
| Set Contents | Step Drill Bits |