- RS-stocknr.:
- 499-306
- Fabrikantnummer:
- 4450118
- Fabrikant:
- EXACT
23 op voorraad - levertijd is 1 werkdag(en)
Toegevoegd
Prijs 1 set
€ 85,44
(excl. BTW)
€ 103,38
(incl. BTW)
Set(s) | Per set |
1 + | € 85,44 |
- RS-stocknr.:
- 499-306
- Fabrikantnummer:
- 4450118
- Fabrikant:
- EXACT
Datasheets
Wetgeving en conformiteit
N.v.t.
Productomschrijving
Sheet metal hole cutter, straight tap, HSS TiAlN
HSS TiAlN-coated hole cutter for particularly hard materials; glides easily and not prone to wear
For burr-free drilling and planing sheet metal, pipes and profiles
Suitable for construction steel, CrNi steel, non-ferrous metals, Plexiglas, plastic and wood up to 5 mm thick
Crosswise grinding, no centre-punching necessary, drill bits do not run
Diameter guide lasered into the tap, legible even when rotating
Three-faced driving shaft, prevents slipping in the drill chuck
For burr-free drilling and planing sheet metal, pipes and profiles
Suitable for construction steel, CrNi steel, non-ferrous metals, Plexiglas, plastic and wood up to 5 mm thick
Crosswise grinding, no centre-punching necessary, drill bits do not run
Diameter guide lasered into the tap, legible even when rotating
Three-faced driving shaft, prevents slipping in the drill chuck
Warning
Not suitable for aluminium. Use without cooling agents.
Specificaties
Kenmerk | Waarde |
---|---|
Drilling Application | Metal |
Drill Bit Type | Cone Cutter |
Material | HSS |
Number of Pieces | 4 |
Minimum Size | 3mm |
Maximum Size | 30.5mm |
Set Contents | Cone Cutter Drill Bits |