Door Open Button, 250 mA @ 24 V dc

  • RS-stocknr. 787-4782
  • Fabrikantnummer 57-10-000305
  • Fabrikant EAO
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CH
Productomschrijving

EAO Series 57 Door Opening Push Button

The Series 57 switches are designed to mount identically to other manufacturers switches that are also designed as door opening push buttons. This gives the potential for direct replacement or a complete upgrade to the 57 series.

Illumination; outer ring: green LEDs, inner ring: red LEDs
2 million operations mechanical lifetime
Operating temperature range -40 to + 85°C
IP69K front protection
Symbols conform to TSI, PRM and ADA
Typical applications include tram and train electrical door opening

Standards

EN 60947-5-1, EN 50155, EN 14752

Specificaties
Kenmerk Waarde
Switch Operation Latching
Contact Current Rating 250 mA @ 24 V dc
Terminal Type Screw
Actuator Type Button
IP Rating IP69
Minimum Operating Temperature -40°C
Maximum Operating Temperature +90°C
Operating Temperature Range -40 → +90°C
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
144,24
(excl. BTW)
174,53
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
144,24 €
10 - 24
136,56 €
25 +
125,55 €
Related Products
Snap-in mountingReliable snap action mechanismLatch or momentaryInterlock switchDetection ...
Description:
Snap-in mountingReliable snap action mechanismLatch or momentaryInterlock switchDetection switchCircuit interrupt.
Double pole, single throw, normally open8mm contact gap8mm ...
Description:
Double pole, single throw, normally open8mm contact gap8mm creepage & air gap clearanceMaintenance override key suppliedShrouded actuator to prevent accidental operationThrough hole or snap-in panel mountingOptional terminal shroudContact Rating -16 A; 250 Vac6.3mm Faston terminals.
The Saia-Burgess door interlock is single pole single ...
Description:
The Saia-Burgess door interlock is single pole single throw (SPST) momentary push button switch. It has a special feature of optional reset spring for better security. Its required contact current rating is 16A with 250VAC voltage rating. The action of ...
In rest position, plunger exerts no force on ...
Description:
In rest position, plunger exerts no force on switchSwitch has built in override facility for maintenanceLong over travelThe plunger has a tapped (4 BA) hole making it suitable for additional user attachmentsContact Rating - 15 A at 250VacSolder connection.