Briton Silver Fire Door Suitable Door Closer

  • RS-stocknr. 187-7148
  • Fabrikantnummer 9963/01/SE
  • Fabrikant Briton
Datasheets
Wetgeving en conformiteit
N.v.t.
Productomschrijving

Automatic Fire Door Closer

A single action surface mounted electro-magnetically controlled door closer. By a simple change in the installation there is the choice of 'hold-open' or a 'swing-free' function. The unit can be door mounted to 'pull' side of door or transom mounted to 'push' side of door. Hold-Open function: The unit encloses an electro-magnet which is controlled by the building's fire/alarm detector system. The door is held open by the magnet claw device. On operation of the alarm the magnet is released and the door closes automatically. Free-Swing function: The closer arm and the door are allowed to pivot independently of the closer and catch plate. On operation of the alarm the magnet is released hence allowing the door to close from whatever position.,Fire, The closer unit is accepted by Fire Officers and Local Authorities and may be used to satisfy the requirements of Appendix B, Approved Document B of the Building Regulations 1991. Note: Power for ancillary devices must not be drawn from the alarm system except under alarm conditions (BS5839; Pt.1. 1988). A transformer rectifier unit with facilities for a plug-in relay is available to power the electromagnet in situations where there is no suitable 24V d.c. supply. Adjustment, The door closer has two adjustments, one to regulate the speed at which the door closes and the other to accelerate closing for the last few degrees of the closing cycle in order to overcome stubborn latch bolts. These two adjustment controls are concealed to avoid possible abuse. Finish, The cover is spray finished silver on zintec treated steel. Arms and backplate are sprayed black. All sprayed finishes are stoved for improved durability. Relays available:,DPCO dc. coils 12V (15.5-17V) Stock no 268-4357 and 27V (11.5-37.5V)Stock no 268-4379

Max Door Weight 60kg
Door Width 950mm

Standards

Door closer: EN1154, EN1155

Supplied with

Full installation instructions, armset and bracket

//media.rs-online.com/t_line/LE187714-05.gif
//media.rs-online.com/t_line/LH187714-05.gif

Standards

EN1634; EN1154

Specificaties
Kenmerk Waarde
Door Width Maximum 950mm
Door Weight Maximum 60kg
Adjustable Strength Yes
Fire Door Suitable Yes
Hold Open Yes
Colour Silver
9 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
409,92
(excl. BTW)
496,00
(incl. BTW)
Aantal stuks
Per stuk
1 +
409,92 €
Related Products
Small compact unit with pressure diecast aluminium body, ...
Description:
Small compact unit with pressure diecast aluminium body, steel rack and pinion and sintered bearingsMax door width 950mmMax door weight 60kgIndependent regulator controls for door speed and latch controlNon-handed mechanism180° door opening subject to hinge projection and surrounding structureSuitable for ...
Small, compact unit with pressure diecast aluminium body, ...
Description:
Small, compact unit with pressure diecast aluminium body, steel rack and pinion and sintered bearingsTemplate adjustable during installation to suit closer sizes 2-4max door width 1100mmMax door weight 80kgIndependent regulator controls for door speed and latch controlNon-handed mechanism180° door opening ...
Small compact unitPressure diecast aluminium bodySilver ColourAdjustableClosing SpeedLatchingBack ...
Description:
Small compact unitPressure diecast aluminium bodySilver ColourAdjustableClosing SpeedLatchingBack CheckSteel rack and pinion and sintered bearings180° door opening subject to hingeNon-handed mechanism projection and surrounding structureComplete with full installation instructions.
Manufactured with proportionately longer forks for greater reach ...
Description:
Manufactured with proportionately longer forks for greater reach or higher working angles, this series spans M5-M12DIN 71752.