Entrelec Distribution Block, 10 → 70 (End 1) mm², 2.5 → 16 (End 2) mm², 12 Way, 175A, 1 kV ac, 1.5 kV dc

  • RS-stocknr. 100-3922
  • Fabrikantnummer 1SNL317510R0000
  • Fabrikant Entrelec
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

DBL Series Distribution Terminal Blocks

ABB DBL modular distribution terminal blocks for installation on modular blocks. Either plate or DIN rail mounted.

DBL Series

Specificaties
Kenmerk Waarde
Number of Ways 12
Termination Method Screw Down
Wire Size 6 → 2/0 (End 1) AWG, 14 → 6 (End 2) AWG
Housing Material Polyamide
IP Rating IP10
Current Rating 175A
Voltage Rating 1 kV ac, 1.5 kV dc
Cable CSA 2.5 → 16 (End 2) mm², 10 → 70 (End 1) mm²
Length 46.2mm
Width 52.3mm
Height 72.5mm
Colour Grey
Maximum Operating Temperature +110°C
Minimum Operating Temperature -55°C
24 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
43,56
(excl. BTW)
52,71
(incl. BTW)
Aantal stuks
Per stuk
1 +
43,56 €
Related Products
Range of W series (WPD) distribution blocks from ...
Description:
Range of W series (WPD) distribution blocks from Weidmuller. These distribution blocks range from 0.05 mm² to 300 mm² allowing you to have diverse options for your application. The WPD series distribution blocks are housed with Wemid for increased safety ...
The Phoenix 800V distribution block has flexible use ...
Description:
The Phoenix 800V distribution block has flexible use and clear wiring. It is basic terminal block with supply that can be bridged with one another via the conductor shaft with corresponding plug-in bridges. Degree of pollution 3Overvoltage category IIITime savingSpace ...
The Phoenix Contact PTFIX series distribution block with ...
Description:
The Phoenix Contact PTFIX series distribution block with push in connection offer a flexible distribution solution and it used NS 35/7,5, NS 35/15 mounting type. It can be used straight away and expanded as needed. It has 13 way of ...
Commoning terminals equipped with plastic housing to provide ...
Description:
Commoning terminals equipped with plastic housing to provide IP 2X protection.These terminals are supplied with captive screws that have been loosened to facilitate mounting.May be mounted on DIN rail, support or 12 x 2 flat bar.