- RS-stocknr.:
- 210-8013
- Fabrikantnummer:
- MOTG-CAN
- Fabrikant:
- 4D Systems
5 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 19,29
(excl. BTW)
€ 23,34
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 19,29 |
5 - 9 | € 19,05 |
10 + | € 18,24 |
- RS-stocknr.:
- 210-8013
- Fabrikantnummer:
- MOTG-CAN
- Fabrikant:
- 4D Systems
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- AU
Productomschrijving
The 4D Systems MOTG, Modules on the Go is a concept from 4D Systems revolutionizing embedded design allowing instant and flexible hardware expansion solution. MOTG modules offer a simple plug and play interface to Universal MOTG BUS (UMI) allowing rapid assembly and maintenance. This removes the hassle of having to solder and end up with a wiring nest. It also allows the designer to easily remove the existing module or add another module instead. Controller Area Network (CAN Bus) is a multi-master communication network for various industrial and automotive applications. Unfortunately, most microcontroller does not have an on-board CAN Bus controller and transceiver. MOTG-CAN provides a high speed
It enables easy connectivity to popular host controllers such as gen4 modules, Arduino, Raspberry Pi and Beaglebone Black
Supports CAN V2.0B at 1 Mb/s operation
Supports both 3.3V and 5V power supply
Maximum of 112 nodes connected
MCP2515 CAN Controller
Supports CAN V2.0B at 1 Mb/s operation
Supports both 3.3V and 5V power supply
Maximum of 112 nodes connected
MCP2515 CAN Controller
Specificaties
Kenmerk | Waarde |
---|---|
For Use With | gen4 Series Display Modules |
Kit Contents | MOTG-CAN |
Kit Name | MOTG-CAN |