Microchip Technology HV5812PJ-G Display Driver

  • RS-stocknr. 177-1603
  • Fabrikantnummer HV5812PJ-G
  • Fabrikant Microchip
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

HV5812 is a 20-channel, serial input, vacuum-fluorescent display driver. It combines a 20-bit CMOS shift register, data latches, and control circuitry with high voltage MOSFET outputs. The HV5812 is primarily designed for vacuum-fluorescent displays. The CMOS shift register and latches allow direct interfacing with microprocessor based systems. Data input rates are typically over 5.0MHz with 5.0V logic supply. Especially useful for interdigit blanking, the BLANKING input disables the output source drives and turns on the sink drivers. Use with TTL may require external pull-up resistors to ensure an input logic high.

Additional Features:
HVCMOS® technology for high performance
Operating voltage up to 80V
High speed source driver
5.0V CMOS logic circuitry
Up to 5.0MHz data input rate
Excellent noise immunity
Flexible high voltage supplies

Specificaties
Kenmerk Waarde
Package Type PLCC
Number of Pins 28
Supply Voltage 4.5 → 5.5 V
Current Rating 3.5mA
Power Dissipation 1900mW
Series HV5812
Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Prijs Each (In a Tube of 38)
1,792
(excl. BTW)
2,168
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
38 - 76
1,792 €
68,096 €
114 +
1,629 €
61,902 €
*prijsindicatie
Related Products
Supports up to 20V Output Pull-up Voltage–40°C to ...
Description:
Supports up to 20V Output Pull-up Voltage–40°C to 125°C Operating Temperature RangeSupports Wide Range of Stepper Motors, DC Motors, Relays, and Inductive CoilsLow Output VOL of 0.4V (Typical) With– 140mA Current Sink per Channel at 5.0V Logic Input(1)– 1A Current ...
The HV5622 is a low-voltage serial to high-voltage ...
Description:
The HV5622 is a low-voltage serial to high-voltage parallel converter with open drain outputs. This device has been designed for use as a driver for AC-electroluminescent displays. It can also be used in any application requiring multiple output high voltage ...
The HV7224 is a low-voltage serial to high-voltage ...
Description:
The HV7224 is a low-voltage serial to high-voltage parallel converter with push-pull outputs. It is especially suitable for use as a symmetric row driver in AC thin-film electroluminescent (ACTFEL) displays. When the data reset pin (DRIOA/DRIOB) is at logic high, ...
High-brightness low-profile dot matrix graphic display modules. The ...
Description:
High-brightness low-profile dot matrix graphic display modules. The modules include the VFD glass, VF drivers and microcontroller. 8-bit Parallel/Serial Interface (Selectable by jumper)Low Profile ConstructionSingle 5Vdc SupplyAll of the displays use a green phosphor with 505nm peak wavelength and colour ...