8 Way Through Hole DIP Switch 8P

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

TE Connectivity ADE and ADF Series DIP Switches

ADE and ADF series through hole mounting 7.5 x 3.5mm DIP switches with a 2.54mm centerline, gold flash plated contacts and black PPS housings. The ADE series DIP switches have extended slide actuators whilst the ADF series DIP switcheshave flush slide actuators. Both versions of these DIP switches have a high pressure contact system and are auto insertable.

High pressure wiping contact allows aqueous or solvent cleaning without tape seal
Can withstand vapour phase reflow or wave soldering conditions
Contact resistance: 50mΩ

Note

Unless stated otherwise, these switches are not suitable for immersion cleaning

Specificaties
Kenmerk Waarde
Contact Configuration 8P
Contact Current Rating 100 mA @ 24 V dc
Contact Material Gold over Nickel Plated Copper Alloy
Number of Positions 8
Mounting Type Through Hole
Actuator Type Slide
Package Style DIP
Maximum Operating Temperature +85°C
Minimum Operating Temperature -30°C
Operating Temperature Range -30 → +85°C
600 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Tube of 20)
0,63
(excl. BTW)
0,76
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
20 +
0,63 €
12,60 €
*prijsindicatie
Related Products
Connector, High contact reliability, Long stroke of 7.5mm. ...
Description:
Connector, High contact reliability, Long stroke of 7.5mm. High contact reliability:The contact part has a self-cleaning function.Long Stroke:Full strokeʹ7.5mmSnap-in Panel MountingConnector Socket:The terminal section can be one touch to the contactor.This can shortener lead wire installation time.
Available in a choice of configurationsChangeover (SPDT) types ...
Description:
Available in a choice of configurationsChangeover (SPDT) types have break-before-make contacts (pairs of pins along one side of the switch must be commoned to achieve a changeover action)Suitable for dry circuit switchingNon switching rating: 5A @ 100VacContact resistance: 10mΩ.
Enabling reliable ON/OFF switching of PCB track signals ...
Description:
Enabling reliable ON/OFF switching of PCB track signals using a 2.54mm pitch. These switchable jumpers provide an alternative to conventional jumper links by eliminating the need for 'parking pins' on the PCB or exposing bare pins. Available in single or ...
A range of high performance DIP switches with ...
Description:
A range of high performance DIP switches with dustproof construction. PCB through hole mountRoHS compliantGold plated twin contacts, self-cleaningSmooth, sure switching actionContact resistance:100mΩ maxInsulation resistance: 100mΩ min. at 250VdcMechanical life: 5 x 103.