RS PRO Din Rail Top Hat, Slotted, 500mm x 35mm x 7.5mm

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

RS Pro Top Hat DIN Rail TS 35

From the trusted RS PRO brand, a selection of robust TS-35 standard DIN rails used for mounting various electrical and industrial equipment. The TS-35 rail or Top Hat as it is also known is manufactured from cold rolled steel which is then zinc coated and clear passivated. This ensures its strength and corrosion proof properties. Available in various lengths and slotted and un-slotted (perforated) profiles for easy attachment and wiring.

What is DIN Rail?

DIN Rail is a metal rail used to mount electrical, pneumatic and hydraulic components in control cabinets, enclosures racks and panels. DIN Rail is manufactured to conform to a specific set of standards outlined by the Deutsch Institute von Normen (DIN). Due to the uniform profile, it ensures components can be sourced from several different manufacturers and suppliers, safe in the knowledge all products can be mounted on the same rail.

Why should you use RS PRO Top Hat DIN Rail?

Using RS PRO DIN rail enables you to mount your electrical components safely and securely. It provides a central location where wiring can be connected and maintained quickly and efficiently.

Saves space – DIN rail terminals and smaller DIN mounted components can be packed into smaller spaces.
Saves time - DIN mounted components easily slide or snap onto the rail. Relays, timers, circuit breakers and similar products can also be mounted into compatible bases for rapid connection.
Saves money – DIN rail provides a cost-effective solution as it allows for a higher density of component mounting, which reduces wiring cost and enclosure space.

Features and Benefits

• Industry standard symmetrical rail – 35 mm x 7.5 mm (Width x Depth)
• Zinc-plated and clear passivated steel material
• Slotted and un-slotted variations
• 0.5 m, 1m, and 2m lengths
• Conforms to EN5022 and DIN 46277-3 standards

Applications

TS-35 standard Top Hat DIN rail is used in a wide variety of industrial applications. It is the most popular size of rail and can be found in almost every rack, panel, and enclosure across many industries and environments. Standard Top Hat rail is ideal where smaller type of components are needed. Some of the most common are

• DIN rail terminal blocks
• Power supplies
• Plug in relays
• Timer modules
• Panel meters
• I/O devices
• Robotics
• Automation and control devices

Note

Hole Size is 6 mm

Standards

DIN 46277
CENELEC EN 50.022

Specificaties
Kenmerk Waarde
Compatibility Top Hat
Length 500mm
Width 35mm
Height 7.5mm
DIN Rail Type Slotted
Material Steel
1164 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
7830 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
4,83
(excl. BTW)
5,84
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
4,83 €
10 - 14
4,65 €
15 +
4,44 €
Related Products
Screw compression clamp terminals incorporating a spring under ...
Description:
Screw compression clamp terminals incorporating a spring under each wire clamp, giving high vibration resistance and also meets requirements of ESI 50//18. Each termination will accept two hook bladed crimp terminals, one locating on the current bar behind the screw ...
A range of screw clamp terminal blocks and ...
Description:
A range of screw clamp terminal blocks and accessories offering a 20% width reduction compared with the Entrelec 5000 series. Designed to mount on ’top hat’ format DIN rails using a unique asymmetrical profile which aids visibility from any direction ...
A range of screw clamp terminal blocks and ...
Description:
A range of screw clamp terminal blocks and accessories offering a 20% width reduction compared with the Entrelec 5000 series. Designed to mount on ’top hat’ format DIN rails using a unique asymmetrical profile which aids visibility from any direction ...
The Mini Series Empty Modular Interface Supports are ...
Description:
The Mini Series Empty Modular Interface Supports are designed to accommodate 72mm wide PCB’s. The modular construction of these PCB carriers means they can accommodate various lengths of PCB’s. Suitable for 72mm width PCB’sModular construction for easy assemblySnap fit Din ...