Weidmuller, SAK Series , 800 V Feed Through Terminal Block, Screw Termination

  • RS-stocknr. 829-6593
  • Fabrikantnummer SAK 2.5 KRG
  • Fabrikant Weidmüller
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: HU
Productomschrijving

SAK Series Modular Feed Through Terminals

High quality, industry standard terminals designed for mounting on symmetrical TS35 (top-hat profile) DIN Rail. With high reliability and variety of designs, the SAK series from Weidmuller make planning easier and optimise safety. The terminals are manufactured from polyamide 6.6 with a working temperature of -50°C to +100°C, and meet the requirements of IEC 60947-1.

Features and Benefits

• Steel clamping yoke for mechanical function • Copper current bar for electrical function
• No maintenance, vibration-proof screw connection
• Low voltage drop and gas-tight contact point
• Clamping point suitable for a wide range of cross-sections
• Three different locking feet available: for TS32, TS35 or a combination of the two
• Different isolation materials: PA6.6, KrG, KrS
• Large selection of special terminals with various connection systems

SAK Series

Terminals manufactured from polymide 6.6 with a working temperature of -50°C to +100°C except the fused terminal block (425-689) which is high grade melamine with a working temperature of -60°C to +130°C. Asymmetric rail (G-profile) to B 5825:1980 EN 50035 mounting

Specificaties
Kenmerk Waarde
Series SAK
Wire Size 26 → 10 AWG
Cable CSA 2.5mm²
Colour Yellow
Current Rating 24A
Number of Levels Single
Termination Method Screw
Voltage Rating 800 V
Minimum Operating Temperature -60°C
Maximum Operating Temperature +130°C
230 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
230 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
1,743
(excl. BTW)
2,109
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
1,743 €
17,43 €
*prijsindicatie
Related Products
One key advantage of the W-Series is the ...
Description:
One key advantage of the W-Series is the choice of plug-in (ZQV) or screw-in (WQV) cross-connections within one modular terminal. Saving substantial time in comparison to other screw terminals. Terminals available in a range of coloursScrew-in and a plug-in cross ...
Earth terminal blocks that provide reliable electrical and ...
Description:
Earth terminal blocks that provide reliable electrical and mechanical contact with the DIN Rail. • Green/yellow colour coded• Flexibility to snap onto symmetrical and asymmetrical rails• Screw clamp connection.
DIN rail mounted terminals, with universal mounting foot ...
Description:
DIN rail mounted terminals, with universal mounting foot clips to both ’G’ profile (asymmetric to BS5825:1990) and ’top hat’ profile (symmetric to BS5584:1978) rails, with a range of features to suit all applications. The 2.5 to 10mm² terminals have common ...
Screw-connection terminal blocks ensure an electrical connection between ...
Description:
Screw-connection terminal blocks ensure an electrical connection between 2 solid-centre or flexible conductors. Grey for standard circuits and blue for neutral conductors.One junction (1 input / 1 output).