Weidmuller, W Series , 55 V Thermoelectric Voltage Terminal Block Pair, Screw Termination

  • RS-stocknr. 823-9732
  • Fabrikantnummer WDU 2.5/TC TYP SR -1024400000
  • Fabrikant Weidmuller
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

W Series Modular Thermocouple Terminals

A versatile and extensive range of 2.5 mm² thermocouple terminal blocks compatible with the most popular thermocouple types:

8239726 - Type K
8239720 - Type T
8239739 - Type J
8239732 - Type SR
8239736 - Type B
8239745 - Type E
8239748 - Type N

Hardened steel for mechanical strength and high-quality tinned copper contacts for optimum conductivity. All materials comply with RoHS requirements and have been tested to current environment guidelines.

Features and Benefits

• Spring and screw connection technology • Snap-on mounting

Approvals

CE, CSAEX, ATEX, EAC, Exi, IECEx-SIRA, IEC EC, INMETRO

The ’W’ series screw clamp terminals are suitable for ’Top Hat’ DIN Rail and manufactured from nylon 6.6 which has a continuous temperature rating of 120°C (180°C short term). They are self-extinguishing to UL94V-0 and free from cadmium and halogen. Current bars are constructed from 10 mm electrolytic copper to ensure a current loading more than nominal rating. Terminals are suitable for mounting on symmetric ’Top Hat’ rail only (BS5584:1978, EN 50022) and are touch proof in accordance with BS 3042.

Specificaties
Kenmerk Waarde
Series W
Wire Size 26 → 12 AWG
Cable CSA 2.5mm²
Colour Dark Beige
Current Rating 1 (ATEX)A
Number of Levels Single
Termination Method Screw
Voltage Rating 55 V
Pitch 10.2mm
Minimum Operating Temperature -50°C
Maximum Operating Temperature +120°C
37 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
7,12
(excl. BTW)
8,62
(incl. BTW)
Aantal stuks
Per stuk
1 +
7,12 €
Related Products
A miniature range of screw terminals designed for ...
Description:
A miniature range of screw terminals designed for mounting onto symmetric rail. The terminals are moulded in tough flame-resistant nylon 6.6. The captive terminal screws have hardened heads to prevent burring. • Standard terminals (grey or blue) and earth terminals ...
For the termination of 3 wire sensors. Common ...
Description:
For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both ...
Universal terminals moulded in polyamide to fit both ...
Description:
Universal terminals moulded in polyamide to fit both 'G' and 'Top Hat' rail.Screw conductor securing with closed screwdriver shafts. Available conductor acceptance sizes, 2.5mm² to 35mm². The range comprises of grey (phase), blue (neutral), and yellow/green (earth) terminals. A 10-way ...
Disconnect terminal blocks enable you to rapidly localise ...
Description:
Disconnect terminal blocks enable you to rapidly localise system faults, and permits inspection work to be carried out under zero voltage conditions. A standard height version for 2.5mm² wire, and a double-deck version for 4.0mm² wire is availableColour grey.