Phoenix Contact, PT 4, 800 V Feed Through Terminal Block, Push In Termination

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: PL
Productomschrijving

PT 4 Feed-Through and Multi-Conductor Terminal Blocks

50% less insertion force
Compact design and front connection facilitate wiring in the smallest of spaces
Tool-free wiring of conductors with ferrules or solid conductors
Stranded conductors with ferrules can be inserted directly with PIT 2,5 (from 0.34 mm2) and PIT 4 (from 0.5 mm2)
Actuation lever opens the terminal point, so there is no direct contact with live parts
Double bridge shaft enables individual potential distribution and supply

Push-In Connection Terminal Blocks

The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.

Specificaties
Kenmerk Waarde
Series PT 4
Wire Size 24 → 10 AWG
Cable CSA 0.2 → 6mm²
Colour Grey
Current Rating 32A
Number of Levels Single
Termination Method Push In
Voltage Rating 800 V
270 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1190 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
0,786
(excl. BTW)
0,951
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 45
0,786 €
3,93 €
50 - 120
0,764 €
3,82 €
125 +
0,744 €
3,72 €
*prijsindicatie
Related Products
A professional range of PTS series Feed-through terminal ...
Description:
A professional range of PTS series Feed-through terminal blocks from Phoenix Contact. These push in connection terminal blocks are characterised by the system features of the CLIPLINE complete system and by easy tool-free wiring of conductors with ferrules or solid ...
A professional range of PTS series Twin Feed-through ...
Description:
A professional range of PTS series Twin Feed-through terminal blocks from Phoenix Contact. These push in connection terminal blocks are characterised by the system features of the CLIPLINE complete system and by easy tool-free wiring of conductors with ferrules or ...
Feed-through terminal block, nom. voltage: 800 V, nominal ...
Description:
Feed-through terminal block, nom. voltage: 800 V, nominal current: 24 A, connection method: Push-in connection, number of connections: 4, cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, width: 5.2 mm, height: 45.7 mm, colour: grey, mounting type: ...
The Phoenix feed through terminal block is characterized ...
Description:
The Phoenix feed through terminal block is characterized by the system features of the CLIPLINE complete system and by easy and tool-free wiring of conductors with ferrules or solid conductors. It can work in ambient temperature from -60 °C to ...