Phoenix Contact, PT 4-FSI/F, 400 V Fused DIN Rail Terminal, Push In Termination

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: PL
Productomschrijving

PT Type F Fused DIN rail terminal block - Phoenix Contact

The PT DIN rail mounted terminal blocks from Phoenix contact are fused, type F terminal blocks that give you the added protection compared to a conventional DIN rail terminal block. PT series blocks are small in size, so it allows for wiring in confined spaces while also allowing a more compact setup on a single rail. These terminal blocks have a double function shaft while also having an additional testing port and thanks to the push-in connection technology, you'll have an effortless install. Simply plug in your cable and ensure a tight connection has been made by slightly tugging the cable.

The housing is made from a black polyamide material and is backed by a flammability rating of V0. Not to mention, these PT terminal blocks also have an LED to allow you to determine your voltage rating.

Features and benefits:

  • Added protection with an F type fuse

  • Small size allows for even the tightest of installs

  • LED to indicate voltage

  • 50% less insertion force thanks to Phoenix's initiative push-in connection technology

What is a fused terminal block?

A fused terminal block is simply a terminal block, with a fuse. Fused terminal blocks typically do the same job as a conventional terminal block would do, however, just with the added protection of a fuse inside it. The fuse helps prevent overvoltages by breaking the circuit.

How does a fused terminal block work?

A fused terminal block is very similar in how normal terminal blocks work. Terminal blocks are designed to connect wires together effectively or connect multiple levels of wires together. Fused terminal blocks just include a fuse in the connection between the two wires. Having a fuse in the terminal block prevents unnecessary and messy wiring and can help achieve certifications.
A fused terminal block is very similar in how normal terminal blocks work. Terminal blocks are designed to connect wires together effectively or connect multiple levels of wires together. Fused terminal blocks just include a fuse in the connection between the two wires. Having a fuse in the terminal block prevents unnecessary and messy wiring and can help achieve certifications.

Complete Line:

The PT series is apart of Phoenix Contacts vast and comprehensive portfolio. Complete line is a solution from Phoenix Contact that gives you a full range of products that all go hand-in-hand to make a perfect control cabinet. It covers all bases from connections, switching and measuring all the way to controlling, supplying and automation. Choosing complete line products makes it far more efficient to get a cabinet working.

Push-In Connection Terminal Blocks

The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.

Specificaties
Kenmerk Waarde
Series PT 4-FSI/F
Wire Size 24 → 10 AWG
Fused Yes
Colour Black
Current Rating 10A
Number of Levels Single
Termination Method Push In
Voltage Rating 400 V
Pitch 6.2mm
13 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
201 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
3,89
(excl. BTW)
4,71
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
3,89 €
10 - 24
3,78 €
25 +
3,68 €
Related Products
These compact terminals from Phoenix Contact allow for ...
Description:
These compact terminals from Phoenix Contact allow for complex switching tasks in confined spaces. Mounted on TS15 RS 467-349. These terminals have a pitch of just 4.2mm. End clamp is available to purchase separately. • Screw connection• Space saving• Mount ...
Compact design for maximum space savingIntegrated labelling areas ...
Description:
Compact design for maximum space savingIntegrated labelling areas on every terminal pointOptional, large labelling option using STP ... double marker carriersLink the levels to the FBS ...-PV bridges.
The Phoenix Contact Fuse modular terminal block with ...
Description:
The Phoenix Contact Fuse modular terminal block with Push-in connection method. Its nominal current is 6.3 A and nominal voltage is 500V. This terminal block is grey in colour. Cross section ranges from 0.2mm²to 6mm²6.2mm width G / 5 x ...
Neutral conductor disconnect Terminals for use with a ...
Description:
Neutral conductor disconnect Terminals for use with a neutral busbar, allowing the disconnection of individual circuits from the busbar without having to remove the terminated cable. The distribution of current is limited by the size of the busbar. Busbar connection ...