Phoenix Contact, PT 2.5-TWIN/1P-PE Standard Din Rail Terminal, Plug In Termination

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Pluggable Feed-Through Terminal Blocks with Push-In Connection

Pluggable modular terminal blocks with PT Push-In technology for the modular set-up of control cabinets and systems. The COMBI plug connectors with PIT Push-In connection can be used for signal as well as power wiring. Respective ground terminal blocks are available in the same shape as the basic terminal blocks.

With the standardized COMBI plug-in zone, COMBI plug connectors of all connection methods can be used
Push-In technology with 50 % less insertion force for direct plugging from 0.34 mm²
Actuation button for disconnecting conductors or wiring small cross sections from 0.14 mm²
Actuation button can be operated with any kind of screwdriver
Double bridge shaft for an individual power distribution and supply

Push-In Connection Terminal Blocks

The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.

Specificaties
Kenmerk Waarde
Series PT 2.5-TWIN/1P-PE
Wire Size 26 → 12 AWG
Cable CSA 0.14 → 4mm²
Colour Green/Yellow
Number of Levels Single
Termination Method Plug In
20 op voorraad - levertijd is 1 werkdag(en)
Prijs Each (In a Pack of 10)
2,443
(excl. BTW)
2,956
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 40
2,443 €
24,43 €
50 - 90
2,375 €
23,75 €
100 +
2,311 €
23,11 €
*prijsindicatie
Related Products
Designed for where isolation of a circuit is ...
Description:
Designed for where isolation of a circuit is necessary. The disconnect lever may be opened even when test plugs are fitted and may also be removed completely if required. For 2 and 10 way jumper bars see Z Series Accessories. ...
One key advantage of the W-Series is the ...
Description:
One key advantage of the W-Series is the choice of plug-in (ZQV) or screw-in (WQV) cross-connections within one modular terminal. Saving substantial time in comparison to other screw terminals. Terminals available in a range of coloursScrew-in and a plug-in cross ...
One key advantage of the W-Series is the ...
Description:
One key advantage of the W-Series is the choice of plug-in (ZQV) or screw-in (WQV) cross-connections within one modular terminal. Saving substantial time in comparison to other screw terminals. Terminals available in a range of coloursScrew-in and a plug-in cross ...
A highly flexible system of terminal blocks featuring ...
Description:
A highly flexible system of terminal blocks featuring a disconnectable plug-in zone and 4 connection methods: screw (UT), spring-cage (ST), push-in (DT) and self-stripping (QT). The entire range is standardised. These four connections methods can be freely combined to connect ...