Phoenix Contact STI 2.5-PE/L/N Series Grey DIN Rail Terminal Block, 0.08 → 4mm², Triple-Level, Spring Clamp
- RS-stocknr.:
- 648-3394
- Fabrikantnummer:
- 3031843
- Fabrikant:
- Phoenix Contact
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
- RS-stocknr.:
- 648-3394
- Fabrikantnummer:
- 3031843
- Fabrikant:
- Phoenix Contact
Wetgeving en conformiteit
- Land van herkomst:
- DE
Productomschrijving
STI terminal blocks
The STI range differs from standard terminals on account of an asymmetrically designed terminal base
This makes it possible to guide the neutral conducting busbar past the terminal block and secure it to the insulated support brackets
This makes it possible to guide the neutral conducting busbar past the terminal block and secure it to the insulated support brackets
Note
For use with PIK series screw terminals and DIN rails
Phoenix Contact Earth Terminal Block, 400V, 24A - STI 2.5-PE/L/N - 3031843
When you need to attach multiple wires and components across your PCB (printed circuit board), this terminal block from Phoenix Contact is an effective solution. It's designed for mounting on a standard DIN rail for quick installation and compatibility with common fixtures.
The block has an asymmetrical terminal base. This innovative design lets you guide the neutral conducting busbar past the end and secure it to the insulated support brackets for a more secure connection. The grey PA (polyamide) material offers good impact strength and durability, so you can be sure of a reliable performance over a long product lifespan.
The block has an asymmetrical terminal base. This innovative design lets you guide the neutral conducting busbar past the end and secure it to the insulated support brackets for a more secure connection. The grey PA (polyamide) material offers good impact strength and durability, so you can be sure of a reliable performance over a long product lifespan.
• Cable cross-sectional area of 0.08 to 4mm²
• Grey in colour
• Current rating of 24A
• Three levels
• Spring-clamp termination method
• Voltage rating of 400V
• Wire size of 28 to 12AWG
• Surge voltage rating of 4kV
• UL 94-V0 (Underwriters Laboratories) rating indicates that the unit will burn for no more than 10 seconds if exposed to a naked flame
• Complies with RoHS (Restriction of Hazardous Substances) directives, meaning it contains no more than 0.1% traces of harmful materials, including lead and mercury
• Grey in colour
• Current rating of 24A
• Three levels
• Spring-clamp termination method
• Voltage rating of 400V
• Wire size of 28 to 12AWG
• Surge voltage rating of 4kV
• UL 94-V0 (Underwriters Laboratories) rating indicates that the unit will burn for no more than 10 seconds if exposed to a naked flame
• Complies with RoHS (Restriction of Hazardous Substances) directives, meaning it contains no more than 0.1% traces of harmful materials, including lead and mercury
Approvals
UL, CUL
Standards
DIN VDE 0611
Specificaties
Kenmerk | Waarde |
|---|---|
| Colour | Grey |
| Number of Levels | Triple |
| American Wire Gauge | 28 → 12AWG |
| Series | STI 2.5-PE/L/N |
| Termination Method | Spring Clamp |
| Cable CSA | 0.08 → 4mm² |
| Current Rating | 24A |
| Voltage Rating | 400 V |
| Minimum Operating Temperature | -60°C |
| Maximum Operating Temperature | +105°C |
| Standards Met | cUL, EAC, IEC 60947-7-1, IEC 60947-7-2, UL, VDE |
| Model Number | 5-PE/L/N, STI 2 |