Wago, 870 Series , 500 V Standard Din Rail Terminal

  • RS-stocknr. 388-7462
  • Fabrikantnummer 870-907
  • Fabrikant Wago
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Standard Terminals

870 Series DIN Rail terminal blocks available as 2, 3 or 4-conductor through terminals. The cross section ranges from 0.08² mm to 4 mm² across the 870 series. The terminal blocks are suitable for DIN 15 and DIN 35 rail mounting.

Features and Benefits

• Front entry wiring
• Cage clamp® connection
• DIN Rail mounting

870 Series

Compact screwless DIN rail mount terminals suitable for use with TS35 ’Top Hat’ rails. The compact size of the terminal is possible due to the new cage clamp designed to satisfy the need to reduce cabinet space on site.

Accept cables 0,08 - 2,5 mm²/4 mm² flexible wire
Front cabling enables further space saving
Rated at: 500V/6kV/24A
Jumper bar rated current: 18A
Suitable marker cards and labels also available (each pack contains 5 cards, with 100 markers per card)

Specificaties
Kenmerk Waarde
Series 870
Wire Size 0.08 → 4 mm²
Cable CSA 0.08 → 2.5mm²
Current Rating 24A
Voltage Rating 500 V
Pitch 5mm
440 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
330 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 10)
1,804
(excl. BTW)
2,183
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
1,804 €
18,04 €
*prijsindicatie
Related Products
For use with standard 15mm symmetrical railEarth terminal ...
Description:
For use with standard 15mm symmetrical railEarth terminal tightens on with centre screwDisconnect has Lever action for isolation of circuitsScrewless end stop simply clips onto rail.
An additional selection of 2.5 and 4mm² terminals ...
Description:
An additional selection of 2.5 and 4mm² terminals in useful colours including the newphase colours black, brown and grey, as well as white, orange, yellow and red. Identify signals or voltages easilyTerminal colours match incoming cables, reducing wiring errorThree phase ...
Miniature terminals, designed for mounting on 15 mm ...
Description:
Miniature terminals, designed for mounting on 15 mm symmetrical rail to BS 6273:1982 TS15. The range is ideally suited for use in terminal boxes or areas where space is at a premium. • Moulded in polyamide 6.6 with tin plated ...
Compact design power terminal blocks for mounting exclusively ...
Description:
Compact design power terminal blocks for mounting exclusively on TS 35 rails of 2.3 mm depth. The terminals are built for a simple and secure connection under difficult conditions, using only an 8 mm male hexagonal spanner. A tightening point ...