Wago, 260 Series , 400 V Modular Terminal Block, Clamp Termination

  • RS-stocknr. 297-5956
  • Fabrikantnummer 260-106
  • Fabrikant Wago
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Cage Clamp - 260 Series

Cage clamp® connection terminal blocks with side entry are screwdriver actuated and include fixing flanges at either end of the terminal block. A DIN Rail mounting adapter is also available which screw mounts into the base of the terminal blocks. It is recommended that the maximum distance between adapters is 35-40 mm.

Features and Benefits

• 2 Conductor-through terminal block
• 6 kV surge voltage
101-3877 is a mounting foot with screw for DIN 35 rail

260 Series

Specificaties
Kenmerk Waarde
Series 260
Wire Size 28 → 16 AWG
Cable CSA 0.08 → 1.5mm²
Colour Grey
Current Rating 18A
Number of Levels Double
Termination Method Clamp
Voltage Rating 400 V
Pitch 5mm
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 14/07/2020, met een levertijd van 1 werkdag.
Prijs Each (In a Pack of 5)
1,814
(excl. BTW)
2,195
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 +
1,814 €
9,07 €
*prijsindicatie
Related Products
The Optocoupler Terminal Block is a rail mounted ...
Description:
The Optocoupler Terminal Block is a rail mounted standard terminal block with miniature switching relay and optocoupler for low switching power. 2.5mm squared conductor area, clamp wire connection methods, front-entry wiring type M and grey in colour. • Industrial.
Sectional terminal blocks with disconnect tab. • DIN ...
Description:
Sectional terminal blocks with disconnect tab. • DIN Rail mounting on TS 35 DIN Rail• 3 conductors (1 input, 2 outputs)• Quick connection using cage-type springs, not affected by impact and vibration• For rigid, semi-rigid and flexible conductors• Front wiring. ...
A range of rail-mounted terminal blocks that can ...
Description:
A range of rail-mounted terminal blocks that can fulfill all industrial and Ex applications, as well as those for building installations. Thanks to CAGE CLAMP® S technology, the TOPJOB® S rail-mounted terminal blocks for the DIN 35 carrier rail give ...
Cage clamp® connection terminal blocks with side entry ...
Description:
Cage clamp® connection terminal blocks with side entry are screwdriver actuated and include fixing flanges at either end of the terminal block. A DIN Rail mounting adapter is also available which screw mounts into the base of the terminal blocks. ...