Entrelec, SNA, 1 kV ac Feed Through Terminal Block, Bolt Termination

  • RS-stocknr. 225-4417
  • Fabrikantnummer 1SNA115143R1200
  • Fabrikant Entrelec
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

High Current Double Stud Terminals and Shrouds

A set of 4 spacers is available and should be fitted between each terminal to provide additional isolation. A translucent cover which snaps onto the spacers and can span 3 adjacent terminals is also available as a set.

2 shunt-connect studs and 4 terminals up to 300mm2
Ideal for power cable termination
EExe and EExi certification for use in hazardous areas

Approvals

UL Listed; CSA Certified; ASE; GL; GOST

5000 Universal Series

This universal range of terminals mounts on both asymmetric rail 'G' profile and Top hat profile. Moulded in tough flame-resistant polyamide 6.6, with a working temperature of -55°C to +130°C. The captive terminal screws have hardened heads to prevent burring. Cable entry and clamp design allows easy installation, higher voltage and cable carrying capacity. Cable markers are available RS 460-569

Note

Stock numbers 472-9569 and 472-9575 are compatible with deep top hat rails only

Specificaties
Kenmerk Waarde
Series SNA
Cable CSA 50mm²
Colour Grey
Current Rating 150A
Number of Levels Single
Termination Method Bolt
Voltage Rating 1 kV ac
Pitch 31mm
Minimum Operating Temperature -5°C
Maximum Operating Temperature +40°C
61 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
309 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
10,85
(excl. BTW)
13,13
(incl. BTW)
Aantal stuks
Per stuk
1 +
10,85 €
Related Products
Bolt type screw terminals with protective hoods. The ...
Description:
Bolt type screw terminals with protective hoods. The robust terminals fit to top DIN Rails and are connected by threaded inserts. The connection allows the terminals to work well in harsh environments. • Feed-through connection• Secure connection for power transmission ...
Bolt type screw terminals with protective hoods. The ...
Description:
Bolt type screw terminals with protective hoods. The robust terminals fit to top DIN Rails and are connected by threaded inserts. The connection allows the terminals to work well in harsh environments. • Feed-through connection• Secure connection for power transmission ...
This universal range of terminals mounts on both ...
Description:
This universal range of terminals mounts on both asymmetric rail 'G' profile and Top hat profile. Moulded in tough flame-resistant polyamide 6.6, with a working temperature of -55°C to +130°C. The captive terminal screws have hardened heads to prevent burring. ...
W series stud terminals available in single or ...
Description:
W series stud terminals available in single or double studs from M6 to M16 accepting up to 300 mm² cables. Manufactured from self-extinguishing polyamide UL94V0 and supplied with nut and spring washer. • Double studs with integral partitions• Easily cross ...