Wago, 859-7xx Series , 400 V ac Optocoupler Terminal Block, Cage Clamp Termination

  • RS-stocknr. 170-2800
  • Fabrikantnummer 859-795
  • Fabrikant Wago
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Optocoupler Terminal Block

The Optocoupler Terminal Block is a rail mounted standard terminal block with miniature switching relay and optocoupler for low switching power. 2.5mm squared conductor area, clamp wire connection methods, front-entry wiring type M and grey in colour.

Typical Applications

• Industrial

Specificaties
Kenmerk Waarde
Series 859-7xx
Wire Size 28 → 14 AWG
Cable CSA 0.08 → 2.5mm²
Colour Grey
Termination Method Cage Clamp
Voltage Rating 400 V ac
Minimum Operating Temperature -40°C
Maximum Operating Temperature +70°C
17 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
33 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
28,43
(excl. BTW)
34,40
(incl. BTW)
Aantal stuks
Per stuk
1 +
28,43 €
Related Products
Shielded clamping screw to directly contact shielded wires ...
Description:
Shielded clamping screw to directly contact shielded wires and busbarsTransport rails 1000 mm long, tin-coatedDistancing sleeve prevents buckling while fixing the transport rails (compatible with M5 screws)Insulated holding block for busbars with M4 x 8 mm screen for common shielding ...
Insulation Displacement (IDC) technology achieves speed of assembly ...
Description:
Insulation Displacement (IDC) technology achieves speed of assembly and reliability. A simple cable insertion tool is used to insert the unprepared wire into the terminal. Two styles of terminals are offered, IDC to IDC and IDC to screw. Two sizes ...
Harting Han K4/4 male and female screw terminal ...
Description:
Harting Han K4/4 male and female screw terminal inserts Han-Com K4/4 are a range of high current axial screw terminal connectors with built in earth, size 10B, to be used only with Han HPR hoods and housings, constructed from robust ...
Relay module, Nominal input voltage: 24 VAC, 2 ...
Description:
Relay module, Nominal input voltage: 24 VAC, 2 changeover contacts, Limiting continuous current: 8 A, Red status indicator, Module width: 15 mm. Reinforced insulation between coil and contactsA separator plate (e.g., 209-191) must be used for voltages greater than 250 ...