Weidmuller Fused DIN Rail Terminal, SAKS Series, 630 V, 10A, 1 x 1/4 Fuse, Yellow Single ATEX

  • RS-stocknr. 425-689
  • Fabrikantnummer 0211120000
  • Fabrikant Weidmüller
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: HU
Productomschrijving

Fused

SAKS screw cap: This features a red screw fit, finger release fuse carrier to suit BS1362.ASK1 lever: This features a lever fuse cartridge carrier which accepts 20x5mm fuse links. A window in the top of the carrier enables inspection of the fuse.,KSK lock up: This range of fuse holders feature a black lock up fuse carrier, which is drawn up to its full extent to the open position, enabling fuses to be replaced easily without endangering the operative.The carrier has the fuse size moulded in to enable correct selection of fuse size. Available for fuse sizes 20x5mm, 1x in. and 1 x in.

Note

For use with TS35 DIN Rail - 283-5690

Approvals

7777

SAK Series

Terminals manufactured from polymide 6.6 with a working temperature of -50°C to +100°C except the fused terminal block (425-689) which is high grade melamine with a working temperature of -60°C to +130°C. Asymmetric rail (G-profile) to B 5825:1980 EN 50035 mounting

Specificaties
Kenmerk Waarde
Series SAKS
Wire Size 22 → 10 AWG
Colour Yellow
Current Rating 10A
Number of Levels Single
Termination Method Screw Down
Voltage Rating 630 V
Pitch 13mm
Minimum Operating Temperature -60°C
Maximum Operating Temperature +130°C
Hazardous Area Certification ATEX
260 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
9,736
(excl. BTW)
11,781
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
9,736 €
97,36 €
*prijsindicatie
Related Products
This universal range of terminals mounts on both ...
Description:
This universal range of terminals mounts on both asymmetric rail 'G' profile and Top hat profile. Moulded in tough flame-resistant polyamide 6.6, with a working temperature of -55°C to +130°C. The captive terminal screws have hardened heads to prevent burring. ...
Compact design power terminal blocks for mounting exclusively ...
Description:
Compact design power terminal blocks for mounting exclusively on TS 35 rails of 2.3 mm depth. The terminals are built for a simple and secure connection under difficult conditions, using only an 8 mm male hexagonal spanner. A tightening point ...
These screwless spring cage clamp terminals are specifically ...
Description:
These screwless spring cage clamp terminals are specifically designed for use with 'Top Hat' rail.,The top entry conductor connection is simplicity itself; a flat-bladed screwdriver will ease the spring clamp apart ready for conductor insertion.The range covers conductor sizes from ...
The ST Clipline is terminal block is used ...
Description:
The ST Clipline is terminal block is used widely for industrial application. DIN rail compatible, this versatile series allows you greater flexibility. Fantastic space-saving, the compact design is user-friendly and allows wiring in small spaces. • Double function shaft, offering ...