PCB Carrier 107mm End Section 11.5mm

  • RS-stocknr. 752-7625
  • Fabrikantnummer CIME/E/SE1000S/PK5
  • Fabrikant CAMDENBOSS
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: GB
Productomschrijving

Euro Series 107mm Empty Modular Interface Supports

The Euro Series Empty Modular Interface Supports are designed to accommodate 107mm wide PCB’s. The modular construction of these PCB carriers means they can accommodate various lengths of PCB’s.

Suitable for 107mm width PCB’s
Modular construction for easy assembly
Snap fit Din Rail mounting fixtures
Moulded in green UL 94V0 flame retardant PA
Terminal blocks available in same colour
Integral marker facility
Integral Din rail mounting clip

22 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
6,31
(excl. BTW)
7,64
(incl. BTW)
Aantal stuks
Per stuk
1 - 14
6,31 €
15 - 24
5,99 €
25 +
5,80 €
Related Products
Standard or feed through rated at 750V . ...
Description:
Standard or feed through rated at 750V . Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs. ...
Universal terminals moulded in polyamide to fit both ...
Description:
Universal terminals moulded in polyamide to fit both 'G' and 'Top Hat' rail.Screw conductor securing with closed screwdriver shafts. Available conductor acceptance sizes, 2.5mm² to 35mm². The range comprises of grey (phase), blue (neutral), and yellow/green (earth) terminals. A 10-way ...
Quick and efficient testing of Weidmuller "W" series ...
Description:
Quick and efficient testing of Weidmuller "W" series terminals is achieved with WTA adaptors. The spring legs mean they can be applied by "finger & thumb" pressure, ie no snap on points to break. Test cable of up to 1.5mm² ...
Universal terminals moulded in polyamide to fit both ...
Description:
Universal terminals moulded in polyamide to fit both 'G' and 'Top Hat' rail.Screw conductor securing with closed screwdriver shafts. Available conductor acceptance sizes, 2.5mm² to 35mm². The range comprises of grey (phase), blue (neutral), and yellow/green (earth) terminals. A 10-way ...