ETA, Socket, 17 Series

  • RS-stocknr. 729-2877
  • Fabrikantnummer 17-P10-Si
  • Fabrikant ETA
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Single Mounting E-T-A Socket DIN Rail

E-T-A terminal block is a 7-pin INLINE socket
Polarised blade terminal DIN 46244-A6.3-0.8
Up to 16A maximum load
Slot for fitting labels
symmetrical DIN top-hat rail EN 50022 (35 x 7.5 mm)
Designed to be used with the Smart Power Relay E-1048-8I, Thermal-Magnetic Circuit Breakers 3600/3900, Electronic Circuit Protector ESX10

Specificaties
Kenmerk Waarde
Accessory Type Socket
Series 17
For Use With Terminal Block
100 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
75 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
21,24
(excl. BTW)
25,70
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
21,24 €
10 - 24
19,49 €
25 - 49
17,98 €
50 - 99
16,71 €
100 +
15,96 €
Related Products
Feed-through Screw terminal blocks for cables with cross ...
Description:
Feed-through Screw terminal blocks for cables with cross section 2.5 to 35 mm². The terminals are equipped with integral anti-slackening protection and guarantee reliable connection in all low voltage installations. • Low profile range of terminals that enables transition from ...
For the termination of 3 wire sensors. Common ...
Description:
For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both ...
Standard or feed through rated at 750V . ...
Description:
Standard or feed through rated at 750V . Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs. ...
Universal terminals moulded in polyamide to fit both ...
Description:
Universal terminals moulded in polyamide to fit both 'G' and 'Top Hat' rail.Screw conductor securing with closed screwdriver shafts. Available conductor acceptance sizes, 2.5mm² to 35mm². The range comprises of grey (phase), blue (neutral), and yellow/green (earth) terminals. A 10-way ...