Phoenix Contact, Cover, D-UT 2.5/10 Series

Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: FR
Productomschrijving

Phoenix Contact UT Terminals

All metal parts are of high strength copper alloys
Simple multi-conductor connection
Maintenance-free "Reakdyn principle"
All accessories are compatible with the CLIPLINE range

Note

Cable cross-sectional area quoted refers to cable with rigid conductors

D-UT 2,5/10 - 3047028

A grey, 47mm, PA end cover which is part of the UT clipline range.

Phoenix Contact CLIPLINE UT Range

Specificaties
Kenmerk Waarde
Accessory Type Cover
Series D-UT 2.5/10
For Use With Terminal Block
785 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1190 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
0,384
(excl. BTW)
0,465
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 45
0,384 €
1,92 €
50 - 120
0,364 €
1,82 €
125 +
0,346 €
1,73 €
*prijsindicatie
Related Products
Feed-through Screw terminal blocks for cables with cross ...
Description:
Feed-through Screw terminal blocks for cables with cross section 2.5 to 35 mm². The terminals are equipped with integral anti-slackening protection and guarantee reliable connection in all low voltage installations. • Low profile range of terminals that enables transition from ...
These compact terminals from Phoenix Contact allow for ...
Description:
These compact terminals from Phoenix Contact allow for complex switching tasks in confined spaces. Mounted on TS15 RS 467-349. These terminals have a pitch of just 4.2mm. End clamp is available to purchase separately.
Universal terminals moulded in polyamide to fit both ...
Description:
Universal terminals moulded in polyamide to fit both 'G' and 'Top Hat' rail.Screw conductor securing with closed screwdriver shafts. Available conductor acceptance sizes, 2.5mm² to 35mm². The range comprises of grey (phase), blue (neutral), and yellow/green (earth) terminals. A 10-way ...
The STI range differs from standard terminals on ...
Description:
The STI range differs from standard terminals on account of an asymmetrically designed terminal baseThis makes it possible to guide the neutral conducting busbar past the terminal block and secure it to the insulated support brackets.