Phoenix Contact, EB Jumper Bar for Terminal Block

Datasheets
Wetgeving en conformiteit
Niet conform
Land van herkomst: PL
Productomschrijving

Universal Terminals

Universal terminals moulded in polyamide to fit both 'G' and 'Top Hat' rail.
Screw conductor securing with closed screwdriver shafts. Available conductor acceptance sizes, 2.5mm² to 35mm². The range comprises of grey (phase), blue (neutral), and yellow/green (earth) terminals. A 10-way insertion (jumper) bridge is also available, as is a 35mm rail end bracket.

Individual terminals and complementary accessories

Approval Category II 2 GD EEx e II Cert. No. KEMA 98ATEX1651U

Approvals

E Exei/II; KEMA

Specificaties
Kenmerk Waarde
Accessory Type Jumper Bar
Series EB
For Use With Terminal Block
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 05/01/2021, met een levertijd van 1 werkdag.
Prijs Each (In a Pack of 5)
2,394
(excl. BTW)
2,897
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 45
2,394 €
11,97 €
50 - 120
2,276 €
11,38 €
125 +
2,154 €
10,77 €
*prijsindicatie
Related Products
Feed-through Screw terminal blocks for cables with cross ...
Description:
Feed-through Screw terminal blocks for cables with cross section 2.5 to 35 mm². The terminals are equipped with integral anti-slackening protection and guarantee reliable connection in all low voltage installations. • Low profile range of terminals that enables transition from ...
For the termination of 3 wire sensors. Common ...
Description:
For the termination of 3 wire sensors. Common connection of the supply rails may be achieved with pre-assembled jumper bars allowing the remaining termination to be used for the sensor signal lead. Non-indicating and indicating versions are available for both ...
Standard or feed through rated at 750V . ...
Description:
Standard or feed through rated at 750V . Terminals of the same type may be cross connected using the pre-assembled jumper bars for up to 10 poles (2.5mm-16mm terminals) and 2 poles (35mm terminals).,TSCH partitions fit jumper bar cut outs. ...
These UKK series terminals offer a space-saving solution, ...
Description:
These UKK series terminals offer a space-saving solution, by virtue of having the upper level offset laterally by half of the terminal width. Available in 2.5mm² and 4mm² versions, with a common end cover also available. Better accessibility to the ...