RS PRO, End Plate, AP Series

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

High Current Terminals

Fingerproof terminals (to VBG4 requirements)Flammability rating UL 94-V0Please note that none of the jumper bars shown in this range are suitable for use with this productCable sizes from 6 - 35mm2Mounting method DIN rail (top hat rail)

Note

End covers (Stock Numbers 384-7054, 384-7060 and 384-7076) are required for the 6, 10 and 18mm2 High Current Terminals (Stock Numbers 384-6972, 384-6988 and 384-6994 respectively)

Approvals

UL, CSA

Approvals

UL; CSA

Approvals

UL, CSA

Specificaties
Kenmerk Waarde
Accessory Type End Plate
Series AP
For Use With Terminal Block
210 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
0,478
(excl. BTW)
0,578
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 70
0,478 €
2,39 €
75 - 245
0,464 €
2,32 €
250 +
0,442 €
2,21 €
*prijsindicatie
Related Products
Suitable terminal 872-5619. Triple decker for improved connection ...
Description:
Suitable terminal 872-5619. Triple decker for improved connection density in sensor/actuator appplicationsAll levels can be cross connected using Jumper Bar 3 in 1 out design makes providing common potentials simple24V PNP/NPN versions have internally connected red LED All three levels ...
These double-level terminal blocks are ideal for use ...
Description:
These double-level terminal blocks are ideal for use in applications requiring high density wiring. Interconnection / shorting is possible at both levels. It is suited for 800 V applications and can accommodate larger K6 marking tags.
The innovative PUSH IN technology reduces the amount ...
Description:
The innovative PUSH IN technology reduces the amount of time you spend on wiring to a minimum. Direct insertion guarantees high conductor pull-out forces and simple handling for all conductor types.
These support plates comprise flanges and elements of ...
Description:
These support plates comprise flanges and elements of varying widths to accept printed circuit board plates of 93mm in height and 22, 34.8, 45, 67, 89.6 or 111.6mm in width.The smallest plate is created by assembling the two lateral flanges.The ...