Chinfa, DRU30 DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 30A Output Current

  • RS-stocknr. 789-4073
  • Fabrikantnummer DRU30-24
  • Fabrikant Chinfa
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

CHINFA DIN Rail Power Supply

The CHINFA DIN Rail DRU series battery backed power supply has a universal input voltage ranging between 22.5VDC and 28VDC with a built-in active PFC. The DRU has a built-in boost, a current limited charger which can provide either afloat or fast charge voltage to the battery. The rated output current is 30A at 24VDC output voltage. It also provides automatic battery reverse polarity protection and low voltage deep discharge protection to prevent permanent damage to the battery. This power supply is designed for DIN rail UPS systems.

Features and Benefits

Automatic battery polarity protection
Battery low voltage disconnect (LVD)
Built-in battery test function
Operation temperature ranging between -40°C and 71°C
Parallel connection to a DC bus
Relay and LED alarms
Ripple factor and noise is 100mV

Applications

Electromagnetic drives
Factory automation
Industrial controls
Instrumentation

Certifications

CE certified
cUL
TUV
UL approved

Specificaties
Kenmerk Waarde
Output Voltage 24 V dc
Output Current 30 A
Number of Outputs 1
Type Battery Charger
Width 114mm
MTBF 558000h
Maximum Temperature +71°C
Series DRU30
Depth 90mm
Minimum Temperature -40°C
Ripple And Noise 100mV
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
54 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
122,89
(excl. BTW)
148,70
(incl. BTW)
Aantal stuks
Per stuk
1 +
122,89 €
Related Products
The ABB DIN rail CP-E range switch mode ...
Description:
The ABB DIN rail CP-E range switch mode power supply has an input voltage ranging between 85VAC and 264VAC/90VDC and 375VDC. This power supply provides a U/I output characteristics and allows a parallel operation to enable redundancy. It has an ...
Primary clocked switching power supply unitsWide input rangeHigh ...
Description:
Primary clocked switching power supply unitsWide input rangeHigh efficiencyAdjustable output voltages (devices > 10 W)Low power loss and low heat developmentFree convection cooling (no forced cooling by fan)Idle, overload and continuous short circuit proofIntegrated input protectionU/I characteristic curve ...
The CP-Series, part of the DIMENSION power supply ...
Description:
The CP-Series, part of the DIMENSION power supply family are cost optimized without compromising quality, reliability and performance. The CP10.241-R2 units include a decoupling MOSFET for building 1+1 or n+1 redundant power supply systems without the need of external redundancy ...
The PULS Dimensions CP-series single output DIN-rail redundant ...
Description:
The PULS Dimensions CP-series single output DIN-rail redundant power supply has an output current rating of 20A at 24VDC. It has a single-phase input voltage ranging between 100VAC and 240VAC/ 110VDC and 150VDC with integrated decoupling function. These units include ...