Siemens, SITOP PSU100S DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 5A Output Current

  • RS-stocknr. 776-7725
  • Fabrikantnummer 6EP1333-2BA20
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: AT
Productomschrijving

SITOP Smart Power Supply Unit

The 1 and 3 phase SITOP smart is the universal and powerful standard power supply for machinery and plant engineering. Despite their compact design, they offer an excellent overload response. Thanks to a power boost of 150%, loads with high power consumption can be connected without any problems. The permanent overload capability of 120% offers power reserves in-case of expansions. The high degree of efficiency results in low energy consumption and minimal heat generation inside the control cabinet.
To increase the 24 V availability, the SITOP smart power supply can be combined with buffer, DC UPS, redundancy and selectivity modules.

Features and Benefits

• Compact design • Extra power with 1.5 times the rated current for brief functional overload
• Permanent overload capability with 1.2 times the rated current up to 45°C (24 V versions)
• High degree of efficiency up to 91.5%
• Adjustable output voltage for compensating voltage drops
• Signalling contact for easy integration in the plant monitoring system
• Wide temperature range from -25°C or -10°C to 70°C

Product Application Information

SITOP power supplies can be combined with buffer modules, uninterrupted power supplies, redundancy modules and selectivity modules.

Why use a DIN Rail power supply?

The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC to DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids, relays and many more.

Points to consider when buying a DIN Rail power supply

DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail. Protection types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.
Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.
Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.
Efficiency – Choose a power supply that has an efficiency over 89% to minimise the amount of power dissipation, especially if the system relies on convection cooling.
Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.
Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

Approvals

cULus
cCSAus
ATEX
IECEx
GL

SITOP PSU100S 24 V/5 A Stabilized power supply input: 120/230 V AC, output: 24 V DC/5 A

Specificaties
Kenmerk Waarde
AC or DC Input Voltage Ac
AC or DC Output Voltage Dc
Input Voltage 85 → 132V ac
Output Voltage 24 V dc
Output Current 5 A
Power Rating 144W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 125mm
Width 50mm
MTBF 1998441h
Depth 120mm
Hazardous Area Certification IECEx
Load Regulation 1%
Ripple And Noise 150mV Pk-Pk
Maximum Temperature +70°C
Series SITOP PSU100S
Minimum Temperature -25°C
Output Voltage Adjustment Range 22.8 → 28V
Mounting Type DIN Rail Mount
55 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
Was 105,04 €
99,00
(excl. BTW)
119,79
(incl. BTW)
Aantal stuks
Per stuk
1 +
99,00 €
Related Products
Switch mode power supplies with regulated outputs in ...
Description:
Switch mode power supplies with regulated outputs in fixed, and multi-output voltage options. Suitable for powering a wide range of portable, desk top or fixed equipment including communications, point of sale, test and measurement, instrumentation computing and office equipment. The ...
Our RS PRO power supply comes with pre-fabricated ...
Description:
Our RS PRO power supply comes with pre-fabricated mounting holes to ensure swift mounting and the ability to fix wherever the supply is needed. For Industrial application it features a maximum input voltage range of 230 V ac and 24 ...
The S8VM range is in a traditional metal ...
Description:
The S8VM range is in a traditional metal frame format with some new features. The S8VM range can be used as a first indication to supply problems which can result in lost production, The Early warning system (EWS) can diagnose ...
Just 56 mm deep, the new low profile ...
Description:
Just 56 mm deep, the new low profile DSP DIN Rail mounting power supplies from TDK-Lambda are designed for easy installation into shallow cabinets. The in-built LED indicator gives visual confirmation of the output status. The DIN Rail PSU also ...