Siemens, LOGO!POWER DIN Rail Panel Mount Power Supply, 12V dc Output Voltage, 1.9A Output Current

  • RS-stocknr. 734-2705
  • Fabrikantnummer 6EP1321-1SH03
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: AT
Productomschrijving

SITOP LOGO!Power

Our miniature power supply units in the same design as the logic modules offer great performance in the smallest space. Efficiency has been improved across the entire load range, and the low-power losses in no-load operation ensure efficient operation. The power supplies are suitable for universal use due to their wide-range input for single phase networks and operation with direct voltage. They also have a wide operating temperature range, comprehensive certifications and switch-on behaviour optimised for capacitive loads. These reliable power supplies with their flat, stepped profile can be used flexibly in numerous applications such as in distribution boards.

To increase the 24 V availability, the LOGO!Power supplies can be combined with DC UPS, redundancy and selectivity modules.

Features and Benefits

• Single phase, wide input range 85 V to 264 V ac or 110 V to 300 V dc • Power reserve on starting up through 1.5 times the rated current for capacitive loads
• Wide temperature range: -20°C to 70°C
• Installation depth of 55 mm
• High efficiency across the entire load range

Approvals

cULus, cURus, NEC class 2, CE, CB, FM, ATEX, cCSAus Class I Div. 2, GL, ABS

Warning

  • This product is in obsolescence mode and is due for discontinuation by the manufacturer. We recommend that you review alternative highlighted by the manufacturer. Alternatively, refer to the cross reference list in the Technical Reference section which highlights the upgrade path for your current generation of products.
Specificaties
Kenmerk Waarde
AC or DC Input Voltage Ac, Dc
AC or DC Output Voltage Dc
Input Voltage 85 → 264V ac
Output Voltage 12 V dc
Output Current 1.9 A
Power Rating 23W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 90mm
Width 54mm
Series LOGO!POWER
Load Regulation 1.5%
Ripple And Noise 200mV Pk-Pk
Maximum Temperature +70°C
Mounting Type DIN Rail Mount
Output Voltage Adjustment Range 10.5 → 16.1V
Minimum Temperature -20°C
Hazardous Area Certification ATEX
Depth 52.6mm
Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Prijs Each
72,00
(excl. BTW)
87,12
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
72,00 €
10 - 14
69,08 €
15 +
66,08 €
Related Products
A range of single phase DIN Rail power ...
Description:
A range of single phase DIN Rail power supplies from Mean Well with a fanless design and wattages available between 45 W and 480 W. • Universal AC input/Full range• Protections: Short circuit/Overload/Over voltage/Over temperature• Cooling by free air convection• ...
A range of ultra slim single output DIN ...
Description:
A range of ultra slim single output DIN Rail power supplies with short circuit, overload and over voltage protection. These PSUs can be installed on DIN Rail TS-35/7.5 or 15 and offer cooling by free air convection. Universal AC input/Full ...
The Q-Series DIN rail power supplies from PULS ...
Description:
The Q-Series DIN rail power supplies from PULS are small in size yet offer high efficiency thanks to novel design details and synchronous rectification. With short-term peak power capability of 150% and built-in large sized output capacitors, these features help ...
The single phase SITOP compact series are power ...
Description:
The single phase SITOP compact series are power supplies for the lower performance range. Thanks to the space-saving slim design, they are especially suited to distributed applications in control boxes or in small control cabinets. The SITOP compact range have ...