Siemens, SITOP PSU100C DIN Rail Panel Mount Power Supply, 24V dc Output Voltage, 1.3A Output Current

  • RS-stocknr. 714-1284
  • Fabrikantnummer 6EP1331-5BA10
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: RO
Productomschrijving

SITOP Compact Power Supply Unit

The single phase SITOP compact series are power supplies for the lower performance range. Thanks to the space-saving slim design, they are especially suited to distributed applications in control boxes or in small control cabinets. The SITOP compact range have low-power losses throughout the entire load range. The losses are low even during idling, which means they are perfectly suited for applications that are frequently in stand-by mode. The SITOP PSU100C power supplies have a wide-range input for AC and DC networks; plug-in terminals facilitate the electrical connection.

Features and Benefits

• Single phase wide range input from 85 V ac to 264 V ac or 110 V dc to 300 V dc • Small mounting surface due to its slim design
• High efficiency across the entire range
• Low energy consumption during no-load operation or standby
• Adjustable output voltage
• Green LED for "output voltage OK"
• Plug-in connecting terminals for pre-fabricated wiring and fast electrical connection
• Wide temperature range: -20 °C to 70 °C

Product Application Information

To increase the availability, the SITOP compact power supplies can be combined with DC UPS, redundancy and selectivity modules.

Why use a DIN Rail power supply?

The flexibility of DIN Rail mounting systems enables quicker installation time as all devices are able to simply snap onto the metal rails. Power supplies can be easily organised on DIN Rails within enclosed wall boxes or in areas where there is limited space. Similar devices can be mounted next to each other reducing the amount of cabling required. Most power supplies are convection cooled so no cooling fans are needed.
DIN Rail AC to DC power supplies are widely used in many automation, instrumentation and industrial applications. They are used to power a wide variety of DC operated devices including sensors, motors, actuators, solenoids, relays and many more.

Points to consider when buying a DIN Rail power supply

DIN Rail size – There are three common types of DIN Rails. Top Hat, G section and C section. Most have a depth of 7.5 mm or 15 mm. It is wise to check that your power supply is compatible with your DIN Rail. Protection types – It is important to choose a power supply that is protected against either short circuit, overload, over temperature or over voltage. Some power supplies also offer a hiccup mode which will allow the PSU to resume operation once the fault is cleared.
Fixed or adjustable output voltage or current – In test systems it is often convenient to have adjustable DC voltage however in other applications a fixed DC supply may be essential.
Cabling and wiring – The input/output lines to and from the power supply should be as short as possible with a large cross sectional area to help minimise noise and heat.
Efficiency – Choose a power supply that has a high efficiency to minimise the amount of power dissipation, especially if the system relies on convection cooling.
Input voltage range – If the DIN Rail power supply you are buying is to be used in Europe and North America as well as the UK then a universal AC input range of 80 V ac to 264 V ac is required.
Standards – If the power supply is to be used in the USA for controlling electric motors then it will need to comply with Standard UL508, the safety standard for industrial control equipment.

Approvals

CE, cULus, cCSAus, CB, ATEX, cCSAus Class I Div 2, GL, ABS

Siemens 6EP1331-5BA10 Power Supply, 24 V, 1.3 A, 30 W

Specificaties
Kenmerk Waarde
AC or DC Input Voltage Ac, Dc
AC or DC Output Voltage Dc
Input Voltage 85 → 264V ac
Output Voltage 24 V dc
Output Current 1.3 A
Power Rating 30W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 80mm
Width 30mm
Depth 100mm
Mounting Type DIN Rail Mount
Output Voltage Adjustment Range 22.2 → 26.4V
Minimum Temperature -20°C
Hazardous Area Certification ATEX
Series SITOP PSU100C
Maximum Temperature +70°C
Ripple And Noise 200mV Pk-Pk
Load Regulation 0.2%
45 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
23 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
46,00
(excl. BTW)
55,66
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
46,00 €
10 - 14
44,13 €
15 +
42,23 €
Related Products
The RS Pro Class II C8 Inlet Desktop ...
Description:
The RS Pro Class II C8 Inlet Desktop power supply has an output power of 65W and compliant to ErP III (Level VI) efficiency regulations and has a built in short-circuit and over-voltage protector. This power supply is lightweight, simple ...
These CCTV power supplies are 150 W AC-DC ...
Description:
These CCTV power supplies are 150 W AC-DC (CLASS I), with a Level VI efficiency. Available with IEC 2 Pin (C8)/IEC 3 Pin (C6)/IEC 3 Pin (C14) Inlets.Our RS Pro line of desk power supplies provides a reliable & robust ...
The Dimension CP-Series are cost optimized power supplies ...
Description:
The Dimension CP-Series are cost optimized power supplies without compromising quality, reliability and performance. The most outstanding features of the CP20 series are the high efficiency, electronic inrush current limitation, active PFC, wide operational temperature range and the extraordinary small ...
The CP-Series, part of the DIMENSION power supply ...
Description:
The CP-Series, part of the DIMENSION power supply family are cost optimized without compromising quality, reliability and performance. The CP10.241-R2 units include a decoupling MOSFET for building 1+1 or n+1 redundant power supply systems without the need of external redundancy ...