TRACOPOWER TCL-DC Switch Mode DIN Rail Power Supply, 18 → 75V dc dc Input, 5V dc dc Output, 5A Output, 25W
- RS-stocknr.:
- 667-0876
- Fabrikantnummer:
- TCL 024-105 DC
- Fabrikant:
- TRACOPOWER
102 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
206 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 85,88
(excl. BTW)
€ 103,91
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 - 9 | € 85,88 |
| 10 - 14 | € 81,59 |
| 15 + | € 77,29 |
- RS-stocknr.:
- 667-0876
- Fabrikantnummer:
- TCL 024-105 DC
- Fabrikant:
- TRACOPOWER
Wetgeving en conformiteit
- Land van herkomst:
- CN
Productomschrijving
Traco Power DIN Rail Power Supply, Single Phase, ±0.5% Load Regulation - TCL Series - TCL 024-105 DC
Is your supply voltage too high for your 5V DC equipment? Bring it down a peg or two with this DIN rail power supply from Traco Power. A wide input voltage range between 18 and 75V DC makes it compatible with most electrical setups. Peak-to-peak, ripple and noise is no more than 50mV, so your equipment is set up to perform at its best. Compact dimensions of just 100 (L) x 27 (W) x 75mm (D) mean it fits into standard enclosures and takes up minimal space on your DIN rail.
Features & Benefits
• Snap-on DIN rail mounting for safe and speedy installation
• 86% efficiency means little power is wasted during conversion
• Operates at temperatures between -25°C and +70°C, so is widely compatible with industrial settings
• Overload and short-circuit protections shield people and connected equipment from electrical faults
• 86% efficiency means little power is wasted during conversion
• Operates at temperatures between -25°C and +70°C, so is widely compatible with industrial settings
• Overload and short-circuit protections shield people and connected equipment from electrical faults
Applications
• Industrial control
• Instrumentation devices
• IT equipment
• Power distribution
• Instrumentation devices
• IT equipment
• Power distribution
Can I mount this unit on a chassis instead of a DIN rail?
Yes. This DIN rail power supply comes with a handy mounting bracket, so you can fit it on a chassis or wall if that's more convenient.
Specificaties
Kenmerk | Waarde |
|---|---|
| Type | Switch Mode |
| Output Voltage | 5V dc |
| Output Current | 5A |
| AC or DC Input Voltage | dc |
| AC or DC Output Voltage | dc |
| Input Voltage | 18 → 75V dc |
| Power Rating | 25W |
| Electrical Phase | 1 |
| Number of Outputs | 1 |
| Height | 75mm |
| Width | 27mm |
| Depth | 100mm |
| Series | TCL-DC |
| Output Voltage Adjustment Range | 5 → 5.25V |
| Standards Met | CE |
| Maximum Temperature | +70°C |
| Special Features | Overvoltage and Short Circuit Protection |
| Load Regulation | ±0.5% |
| Mounting Type | DIN Rail Mount |
| MTBF | 2500000h |
| Ripple And Noise | 50mV Pk-Pk |
| Minimum Temperature | -25°C |
| Efficiency | 86% |