Phoenix Contact, QUINT-PS/2AC/1DC/24DC/20 PSU, 24V dc Output Voltage, 20A Output Current

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Phoenix Contact QUINT POWER - Power supplies

The range of QUINT POWER from Phoenix contact are superior power supplies that provide a seamless experience as they're feature-packed with all necessary requirements and more. These power supplies maximise the availability of your plant by utilizing technologies such as NFC (Near field communication) so you can quickly configure these supplies from a smartphone, SFB (Selective Fusebreaking), 6-times nominal current for 12ms, extended life range of over 500,000 hours and super-reliable start in difficult loads with a static power reserve (POWERBOOST).

These brilliant power supplies are designed to be mounted onto a DIN rail and contain screw connections for your cables. Not to mention, these PSU's (Power supply unit) features a preventative function monitoring that allows the device to report on critical statues before any errors occur.

Features and benefits:

  • Primary-switched

  • Super-reliable power supplies come backed by over 500,000 hours of life

  • Adjustable voltage ranges cover a vast spectrum of voltages.

  • Fast tripping of standard circuit breakers wutg dynamic power reserve - 6 times to nominal current for 12ms

  • Preventative function monitoring

  • NFC technology allows you to easily configure the PSU (configure signalling thresholds and characteristic curves)

  • Output of 24 VDC/20 A

  • Slim design with a conformal coating to allow you to install it in extreme environments

  • 93% efficient (for 230 V AC and nominal values)

How do I wire a DIN rail power supply?

The QUINTPOWER power supply unit's feature terminal blocks on both the top & bottom of the unit. You'll need to strip 7mm length from your cable and insert it into the terminal blocks. A simple screw connection (M4 screw) will then lock your cable into the terminal block, providing an output or input connection. However, please follow all manafactuer installation instructions.

What are DIN-rail power supplies used for?

Typically these power supplies are mounted into cabinets and are used in industrial circumstances. They can be used for automation, machinery or any project that has modules that are mounted on DIN-rails.

Note

665-7766, 665-7769, 665-7794 and 665-7790 do not feature SFB technology

Approvals

UL/C-UL Recognised (UL 60950), UL/C-UL Listed (UL 508) approved, CSA, CB, ABS

QUINT POWER power supply units – Superior system availability with SFB technology Compact power supply units of the new QUINT POWER generation maximize the availability of your system. With the SFB technology (Selective Fuse Breaking Technology), six times the nominal current for 12 ms, even the standard power circuit-breakers can now also be triggered reliably and quickly. Faulty current paths are switched off selectively, the fault is located and important system parts continue to operate. Comprehensive diagnostics are provided through constant monitoring of output voltage and current. This preventive function monitoring visualizes critical operating modes and reports them to the control unit before an error can occur.

Compact buffer solution
Fast tripping of standard circuit breakers
Preventive function monitoring
Reliable starting of difficult loads and easy system extension

Specificaties
Kenmerk Waarde
AC or DC Input Voltage Ac, Dc
AC or DC Output Voltage Dc
Input Voltage 360 → 575V ac
Output Voltage 24 V dc
Output Current 20 A
Power Rating 480W
Number of Outputs 1
Electrical Phase 2
Type Switch Mode
Height 130mm
Width 120mm
Output Voltage Adjustment Range 18 → 29.5V
MTBF 860000h
Ripple And Noise <50mV Pk-Pk
Efficiency >92%
Minimum Temperature -25°C
Depth 130mm
Mounting Type DIN Rail Mount
Series QUINT-PS/2AC/1DC/24DC/20
Standards Met CUL Listed, DIN VDE 0100-410, EN 50121-4, EN 50178/VDE 0160 (PELV), EN 60950-1/VDE 0805 (SELV), EN 61558-2-17, IEC 60068-2-27, IEC 60068-2-6, UL 508 Listed, UL 60950-1 Recognized
Maximum Temperature +70°C
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
542,56
(excl. BTW)
656,50
(incl. BTW)
Aantal stuks
Per stuk
1 +
542,56 €
Related Products
The single phase switched mode power supply (SMPS) ...
Description:
The single phase switched mode power supply (SMPS) from Block is highly efficient and has a stabilised and adjustable output voltage. Equipped with a wide input range of 85 V ac to 264 V ac. All models have push in ...
Ultra Slim Design - 32 mm150% Peak Load ...
Description:
Ultra Slim Design - 32 mm150% Peak Load for 3 secondsAmbient Operation from -25 °C to +70 °CFull Load at 60 °C (24V/48V)High Efficiency - Up to 92%Volt-Free Contact for DC OKSelectable Parallel Operation85 to 264 VAC Operation3 Year Warranty. ...
230Vac input 24Vdc stabilised outputSafety isolating transformer to ...
Description:
230Vac input 24Vdc stabilised outputSafety isolating transformer to VDE 0551, EN 607424kV input/output flash testedFinger safe easy accessible screw terminalsDouble screw terminals on the outputInput and output fuse protectionLED output voltage indicator.
Din Rail battery chargers for industrial applications with ...
Description:
Din Rail battery chargers for industrial applications with integrated reverse battery connection protection. Battery chargers for DC back up systems ideal for lead-acid batteriesUniversal mains input: 120 - 375VDC, 90 - 264VACShort circuit protectionInternal input filter3 years warranty.