Murrelektronik Limited, EMPARRO DIN Rail Power Supply, 24V dc Output Voltage, 40A Output Current

Wetgeving en conformiteit
Land van herkomst: CZ

Emparro Power Supply 1 and 3 Phase

Murrelektroniks Emparro SMPS units have an efficiency rate of up to 95% keeping power loss and energy consumption to a minimum saving you money.
A higher efficiency rating results in minimum power loss, which equates to reduced operating costs. Emparros lower operating temperature reduces heat build-up in the cabinet ensuring that the device, and the components installed around it are not affected. Therefore, control cabinets with smaller dimensions can be used.
The device supplies up to 50% more power to start up higher loads and capacities without using another power supply.
The output voltage is controlled with a constant current when there is an overload. It is limited to 100% of the nominal current (or to 150% in Power boost mode). The power supply is then protected from damage.

Features and Benefits

• 150% power boost for at least 4 seconds
• Slim design
• Metal housing with protective EMC characteristics
• High mains failure bridging time
• Derating only at 60°C
• Seven different models provide solutions for many applications
• Efficiency up to 95%

Product Application Information

The wide input voltage range makes Emparro suitable for worldwide use.


Switch Mode - Murrelektronik

Kenmerk Waarde
AC or DC Output Voltage Dc
Input Voltage 400V ac
Output Voltage 24 V dc
Output Current 40 A
Power Rating 960W
Number of Outputs 1
Electrical Phase 2, 3
Type Switch Mode
Height 138mm
Width 109mm
Maximum Temperature +70°C
Mounting Type DIN Rail
Output Voltage Adjustment Range 24 → 28V
Minimum Temperature -40°C
Depth 182mm
MTBF >775000h
Standards Met CULus, CULus Recognised, EN 55011 B, EN 60715, EN 60950-1, EN 61000-3-2, EN 61204-3, SEMI F47
Special Features Optimum Performance, Reliable, Space Saving
Ripple And Noise 20mV ac
14 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
496,86 €
Related Products
DC-DC Ultra slim Industrial DIN rail converter, Input ...
DC-DC Ultra slim Industrial DIN rail converter, Input 9-36Vdc, Single Output 24Vdc at 1.25A. Width only 35mm (2SU) 4:1 ultra wide input range-40∼+85°C wide working temperature No minimum load requiredDC output adjustable ( 10%)Cooling by free air convectionCan be installed ...
AC-DC Ultra slim DIN rail power supply, Input ...
AC-DC Ultra slim DIN rail power supply, Input range 85-264VAC, Output 24VDC at 6.25A. Ultra Slim design with 105mm(6SU) widthuniversal input 85 264VAC(277VAC operational)No Load Power consumptionIsolation Class IIDC output Voltage adjustableProtection: short Circuit/overload/over voltagecooling by free air ...
AC-DC Industrial 3-phase DIN rail power supply with ...
AC-DC Industrial 3-phase DIN rail power supply with PFC and Constant Current, Output 24VDc at 10A, DC OK. Three-Phase 340 550VAC wide range input (dual phase operation possible)63mm slim widthBuilt-in passive PFC function compliance to EN61000-3-2High efficiency 92% and low ...
The 1-phase and 2-phase SITOP modular are technology ...
The 1-phase and 2-phase SITOP modular are technology power supplies for sophisticated solutions and offer maximum functionality for use in complex plants and machines.The 24 V/5 A and 10 A power supplies in a compact metal enclosure can be accommodated ...