ELC DIN Rail Panel Mount Power Supply, 12V dc Output Voltage, 25A Output Current

  • RS-stocknr. 217-845
  • Fabrikantnummer ALE1225
  • Fabrikant ELC
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

ALE1225 equipment power supply 300 W

Switch mode power supply 12 V, 25 A.
Output ripple < 3mV effective.
Complies with EN 61000-3-2; integrated ACTIVE power factor correction.
Diagnostic: relay status alert with changeover contact
Adjustable output voltage 10 → 15 Volts.
Power: N+1 cumulative power supplies, thanks to active parallel capability
Protection against short-circuits.
For mounting on DIN rail.

Standards

EN 60950, EN 50081-2, EN 61000-6-2

Standards

EN 60950, EN50081-2, EN 61000-6-2

Specificaties
Kenmerk Waarde
AC or DC Input Voltage Ac
AC or DC Output Voltage Dc
Input Voltage 190 → 440V ac
Output Voltage 12 V dc
Output Current 25 A
Power Rating 300W
Number of Outputs 1
Electrical Phase 1
Height 120mm
Load Regulation 100mV
Output Voltage Adjustment Range 10 → 15V
Ripple And Noise 3mV
Maximum Temperature +45°C
Mounting Type DIN Rail Mount
Depth 120mm
7 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
21 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
224,00
(excl. BTW)
271,04
(incl. BTW)
Aantal stuks
Per stuk
1 +
224,00 €
Related Products
A range of ultra slim single output DIN ...
Description:
A range of ultra slim single output DIN Rail power supplies with short circuit, overload and over voltage protection. These PSUs can be installed on DIN Rail TS-35/7.5 or 15 and offer cooling by free air convection. Universal AC input/Full ...
Spring up terminal accepts wiring of ring terminals.Slim ...
Description:
Spring up terminal accepts wiring of ring terminals.Slim Size.Width: 22.5mm (10W/15W/30W), 36mm (60W/90W),46mm (120W),60mm (240W)Can be installed in six mounting directions.Optical mounting bracket is available for panel mounting.Five-Year Warranty.
The power supplies in the TBD2 range are ...
Description:
The power supplies in the TBD2 range are designed for home automation applications, security systems and control cabinets.They are also used for applications that require insulation class II.DIN rail or chassis mounting.Screw terminal connection.
With tightly regulated output voltage, these DC/DC converters ...
Description:
With tightly regulated output voltage, these DC/DC converters provide a relaible power source for sensitive loads in industrial process controls, factory automation and other equipment exposed to a critical industrial environment. Ultra-wide input voltage rangeOutput voltage adjustableOverload and short circuit ...