Omron, S8VM DIN Rail Panel Mount Power Supply, 12V dc Output Voltage, 53A Output Current

  • RS-stocknr. 110-407
  • Fabrikantnummer S8VM-60012C
  • Fabrikant Omron
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

15W to 1500W S8VM Series with Downtime warning

The S8VM range is in a traditional metal frame format with some new features. The S8VM range can be used as a first indication to supply problems which can result in lost production, The Early warning system (EWS) can diagnose different types of voltage dip and loss which in turn can be wired into a PLC or management system to warn of impending problems.

Series Benefits.

Output voltages easily identified by colour coded labels on the side of the unit
Meets the latest European and relevant international standard
Operating temperature range 0°C to +50°C

Part Number S8VM-60012C

The S8VM Switch mode, Bottom-mounted power supply is a covered type, terminal block structure with screw terminals. Your fingers are protected from electric shocks. S8VM-60012C has a power rating of 600 W and an output voltage of 12 V dc plus a rated input voltage of 100 V ac to 240 V ac. This model incudes green output indicators plus has a fan with forced air cooling.

Bottom mounted power supplies can be front mounted using the correct mounting bracket for 300 w, 600 W and 1500 W models. Part number S8VM-60012C can be front mounted using a DIN Rail mounting bracket series S82Y-VM. Brackets are sold separately – see stock number 818-6815.

Features and Benefits.

• Covered type power supply • Terminal block structure
• Design stops screws from falling out of the terminal block
• Switch mode
• Bottom mounting
• Green output indicators
• Forced air cooled – built in fan
• Power rating 600 W
• Output voltage 12 V dc
• Input voltage 100 V ac to 240 V ac
• Remote control function
• Parallel operation (up to 2 power supplies)
• Harmonic current emissions
• Efficiency 79% min.
• Frequency 50/60 Hz
• Rated output current 53 A
• Power failure alarm – Open collector, 30 V dc maximum (50 mA maximum)
• Electric shock finger protection
• RoHS compliant including Lead Free construction

What is a DIN Rail Mounted Power Supply?

A DIN Rail is a standard type of rail that is used to mount the power supply into racks. DIN Rails are a support for equipment. DIN Rails are normally made from aluminium but if there is a chance that the power supply suffers any shock or vibration, use a steel DIN Rail.

What is A Switch Mode Power Supply?

Switch mode power supplies are a general purpose power supply include a switching regulator converting AC mains power to a lower voltage DC. A Switch mode power supply is efficient limiting any wasted energy.

Safety and Storage.

Do not use an inverter output for the power supply. Mount the power supply using a DIN Rail and secure correctly ensuring limited vibration and shock resistance. Install the power supply away from contactors and other devices. Keep the power supply away from strong high frequency noise and surge. Vibration resistance 10 Hz to 55 Hz. 0.375 mm single amplitude in each 3 directions for 2 hours.
Shock resistance 150 m/s **2 in each 6 directions 3 times.

Note

Customer Warning.
The Safety standards will not apply if you replace the fan on this part number.

Standards

UL508/60950-1/1604, CSA C22.2 No. 14/No. 60950-1/No.213, EN50178, EN60950-1, Harmonic current emissions E 61000-3-2

Specificaties
Kenmerk Waarde
AC or DC Input Voltage Ac
AC or DC Output Voltage Dc
Input Voltage 85 → 264V ac
Output Voltage 12 V dc
Output Current 53 A
Power Rating 600W
Number of Outputs 1
Electrical Phase 1
Type Switch Mode
Height 83.8mm
Width 101.8mm
MTBF 120000h
Series S8VM
Maximum Temperature +50°C
Ripple And Noise ±2%
Efficiency 79%
Minimum Temperature 0°C
Depth 192mm
Mounting Type DIN Rail Mount
Load Regulation ±0.8%
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
850,00
(excl. BTW)
1.028,50
(incl. BTW)
Aantal stuks
Per stuk
1 +
850,00 €
Related Products
EIB/KNX Power Supply with Integrated ChokeCompact Size with ...
Description:
EIB/KNX Power Supply with Integrated ChokeCompact Size with 4SU WidthSuitable Extra Low Voltage(SELV)180-264 VAC inputProtections: Short Circuit/ overload (Short-Circuit-Proof)/ Over VoltageCooling by free air convectionIsolation Class ILED Indicator for Normal Operation, bus reset and bus overloadInstalled on DIN ...
High quality metal cased switch mode power suppliesDesigned ...
Description:
High quality metal cased switch mode power suppliesDesigned for symmetrical 35mm DIN-railIdeal for process control & machine tool applicationsEMC immunity to EN50082-2EMI to EN55011 Class B, FCC level BLow profileAdjustable output voltageFully regulated output, short circuit protection/current limitOver-voltage ...
230Vac input, 12 or 24Vdc (nom) output power ...
Description:
230Vac input, 12 or 24Vdc (nom) output power supply/safety isolating transformerManufactured to EN 61 558, VDE 0570Fully encapsulated in a plastic housingDesigned for easy installation on DIN EN50 022 rails3.75kV input/output flash testedScrew terminals for both input and outputEfficiency 75% ...
230-400Vac input voltageInput voltage adjustment taps:±15VSafety isolating transformer ...
Description:
230-400Vac input voltageInput voltage adjustment taps:±15VSafety isolating transformer with electrostatic screen4510V input/output isolationIntegral output protection fuse providedTwin output terminals for ease of connectionGreen output LEDEasy to read - laser engraved label with international conformity ...