Block 250 (CosΦ=1) VA, 490 (CosΦ=0.5) VA Isolating Transformer, 230V ac, 400V ac Primary, 24V ac Secondary

  • RS-stocknr. 903-9912
  • Fabrikantnummer FST 250/24
  • Fabrikant Block
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

BLOCK FAIL-SAFE Transformer

High-quality multi-purpose FAIL-SAFE transformers. The transformers are designed for the electrical isolation of the input and output sides. The FAIL-SAFE transformers are suitable for the construction of both SELV and PELV electrical circuits.

6.3 x 0.8 mm Tab Connector
4mm² Screw Terminals

Specificaties
Kenmerk Waarde
Primary Voltage Rating 230V ac, 400V ac
Secondary Voltage Rating 24V ac
Power Rating 250 (Cosφ=1) VA, 490 (Cosφ=0.5) VA
Mounting Type DIN Rail
Dimensions 105 x 112 x 106mm
Minimum Operating Frequency 50Hz
Maximum Operating Frequency 60Hz
Maximum Temperature +40°C
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
66,20
(excl. BTW)
80,10
(incl. BTW)
Aantal stuks
Per stuk
1 +
66,20 €
Related Products
BLOCK STEU series isolating transformers with a dual ...
Description:
BLOCK STEU series isolating transformers with a dual input of 230 and 400 Vac, These safety transformers have a high performance for the volume due to their compact design. The transformers are quick to cable up due to the use ...
Brought to you by Block, this range of ...
Description:
Brought to you by Block, this range of Safety Isolating Transformers are short-circuit proof and feature thermal overload protection. The single phase transformers are provided with mounting holes for easy installation, and have two independent secondary windings, which may be ...
Short-circuit proof safety isolating transformersResin encapsulated transformersStable plastic ...
Description:
Short-circuit proof safety isolating transformersResin encapsulated transformersStable plastic enclosureIntegrated fuse protection and thermal cut-out against overloading and short circuitsScrew-type terminals for the connecting leads on input and output sideMeet the requirements of IEC61 558, EN61 558, ...
Safety isolating and isolating control transformersTwin secondary winding ...
Description:
Safety isolating and isolating control transformersTwin secondary winding for series or parallel connection63,100,160 and 250VA transformers can be mounted on standard 35mm DIN railAll units have 4 hole panel mount fixingsEasy installation 4mm² cage clamp terminalsInsulation catagory Class B.