SolaHD 1000VA DIN Rail & Panel Mount Transformer, 220 → 480V ac Primary, 110 → 120V ac Secondary

  • RS-stocknr. 890-8889
  • Fabrikantnummer E1000
  • Fabrikant SolaHD
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

SolaHD SBE Encapsulated Series Transformers

The SBE Encapsulated series control transformers have been epoxy encapsulated thus sealing the transformer windings from moisture, dirt and industrial contaminants. They feature extra deep, moulded terminal barriers which helps to reduce the possibility of electrical failure from arcing or frayed lead wires. Thanks to their rugged design and high reliability they are ideally suited for all industrial applications and environments.

50 to 1000 VA, 50/60 Hz suitable for worldwide applications
Interleaved copper windings reduce I²R losses and maximize efficiency
+55 °C Rise, +105 °C insulation system to minimize heat
Epoxy encapsulated to protect cores and coils against moisture, dirt, and other contaminants
Meets or Exceeds NEMA Standard ST 1 and ANSI C89.1 for load inrush capability
Integrally moulded, flame retardant (IEC 707 / ISO Class 1210) Terminal Blocks provide greater terminal contact area and improved conductivity
Heavy gauge steel mounting plate
Mounting dimensions are compatible with similar control transformers

Specificaties
Kenmerk Waarde
Primary Voltage Rating 220 → 480V ac
Secondary Voltage Rating 110 → 120V ac
Power Rating 1000VA
Mounting Type Panel
Dimensions 162.1 x 186.9 x 141.2mm
Minimum Operating Frequency 50Hz
Maximum Operating Frequency 60Hz
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
354,96
(excl. BTW)
429,50
(incl. BTW)
Aantal stuks
Per stuk
1 +
354,96 €
Related Products
Chassis mounting frame construction low voltage mains transformers ...
Description:
Chassis mounting frame construction low voltage mains transformers with a single 230Vac 50/60Hz primary winding. This range of single-phase single-winding safety and isolation transformer is primarily designed for use in repetitive applications.ABT 7 series transformers provide enhanced electrical isolation ...
Chassis mounting frame construction low voltage mains transformers ...
Description:
Chassis mounting frame construction low voltage mains transformers with a single 230Vac 50/60Hz primary winding. Single-phase single-winding safety and isolation transformers.Able to supply higher powers on occasion.Feature a panel display to reduce ESD. Screw termination.Plate mounting.
The International series transformers have been designed to ...
Description:
The International series transformers have been designed to comply with the demands of electromagnetic control components which can demand inrush currents of up to 10 times the nominal rating without sacrificing secondary voltage stability beyond practical limits. They fully comply ...
Residual current monitors (RCMs) perform a wide range ...
Description:
Residual current monitors (RCMs) perform a wide range of functions for protecting people and machine, they enable the detection of system malfunctions and facilatate troubleshooting before the protective device is switched off, which increases plant and operating safety, and cuts ...