Siemens LCD Digital Power Meter, 90mm x 107.8mm, 3 Phase

  • RS-stocknr. 171-7874
  • Fabrikantnummer 7KM2200-2EA40-1CA1
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: HU
Productomschrijving

Siemens Digital Power Meter

The Siemens digital power meter is a 3-phase standard rail instrument with a graphical display and integrated webserver for acquiring important measured values to evaluate the plant state and power quality. This meter is also suitable for direct measurement voltage rating up to 480V (UL-L, CATIII) and current rating up to 65A (CATIII).

Features and Benefits

• M-bus interface
• An expansion module is not required
• Compact design, directly In the control panel
• Worldwide use
• Interface to the power monitoring system
• Low mounting depth
• Free, intuitive configuration software
• Interface possible to power monitoring software
• Simple mounting and commissioning on a standard mounting rail

Certifications

• CE Approved
• EAC Approved

Specificaties
Kenmerk Waarde
Cutout Height 90mm
Cutout Width 107.8mm
Display Type LCD
Number of Phases 3
Depth 71.4mm
Maximum Measurement 1 MΩ, 65 A, 65 Hz, 400 V ac
Meter Type Digital
3 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
Was 347,00 €
312,30
(excl. BTW)
377,88
(incl. BTW)
Aantal stuks
Per stuk
1 +
312,30 €
Related Products
Solid-state, compact one-piece unit10 bar LED displaySingle flashing ...
Description:
Solid-state, compact one-piece unit10 bar LED displaySingle flashing LED signal for low battery energy reserve alert at 70% dischargeAlternate flashing LED’s alert for battery empty status at 80% dischargeTwo reset methods: Open Circuit Reset (OCR) – upon reconnection to battery ...
The Countis ECi3 is a multi-utility pulse concentrator ...
Description:
The Countis ECi3 is a multi-utility pulse concentrator which communicates via an RS485 link using Modbus protocol. It enables pulses from water, gas, compressed air, electricity meter and the output of analogue sensors (light, temperature, wind) to be registered and ...
The Plug In module enables al measured parameters ...
Description:
The Plug In module enables al measured parameters on M850 power meters to be communicated via RS485 Modbus protocol. Standard Measuring Parameters:Phase Voltage (V)Phase to Neutral Voltage (V)Phase Current (l)Frequency (Hz)Active Power (W)Active Energy (kWh)Reactive Power (Var)Apparent Power (VA)Reactive Energy ...
DIRIS Digiware DHigh-resolution graphic screenEmbedded web server (DIRIS ...
Description:
DIRIS Digiware DHigh-resolution graphic screenEmbedded web server (DIRIS Digiware D-70)Multi-protocols (Modbus, BACnet, SNMP)24 VDC SELV (Safety Extra Low Voltage) power supply elimination of hazardous voltage on cabinet doors.Ergonomic and easy to use with 10 direct access buttons for:measurement ...