Development Kit Smart Buck for use with MIC2230 Step-Down DC/DC Regulator

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Smart Buck click is the two-channel step-down DC/DC converter and regulator, with plenty of additional functions. It can provide voltage measurement at each of its two programmable voltage outputs, as well as the measurement of the current consumption. In addition, it can also provide power consumption measurements of the Click board™ itself, both at the mikroBUS™ +5V power rail, and the external voltage input terminal. Finally, there is 2kbit of EEPROM at disposal, which can be used for logging the measurements, storage of the working parameters, or any other type of general purpose data.

Specificaties
Kenmerk Waarde
Accessory Type Smart Buck
For Use With MIC2230 Step-Down DC/DC Regulator
5 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
28,50
(excl. BTW)
34,48
(incl. BTW)
Aantal stuks
Per stuk
1 +
28,50 €
Related Products
The Digilent myProto accessory board for the NI ...
Description:
The Digilent myProto accessory board for the NI myDAQ and NI myRIO brings all your myDAQ/myRIO's signals to breadboard connections where they can be easily accessed using simple jumper wires, and even adds several useful I/O devices. The MSP connector ...
The Pmod RF2 adds RF communication through the ...
Description:
The Pmod RF2 adds RF communication through the Microchip® MRF24J40 IEEE 802.15.4™ 2.4GHz RF transceiver module. By communicating with the device through SPI, users can transmit data at speeds up to 625 kbps through the ZigBee®, MiWi™, and MiWi P2P ...
The Digilent Pmod I2S2 features a Cirrus CS5343 ...
Description:
The Digilent Pmod I2S2 features a Cirrus CS5343 Multi-Bit Audio A/D Converter and a Cirrus CS4344 Stereo D/A Converter, each connected to 3.5mm Audio Jacks. These circuits allow a system board to transmit and receive stereo audio signals via the ...
Low Input Offset Voltage: 250 μV (maximum)Rail-to-Rail OutputLow ...
Description:
Low Input Offset Voltage: 250 μV (maximum)Rail-to-Rail OutputLow Input Bias Current: 80 pA (maximum at +85°C)Low Quiescent Current: 25 μA (maximum)Power Supply Voltage: 2.5V to 6.0VUnity-Gain StableChip Select (CS) Capability: MCP608Industrial Temperature Range: -40°C to +85°CNo Phase ReversalAvailable in Single, ...