Texas Instruments SN74LS42N, Decoder, Demultiplexer, 1-of-10, Inverting, 16-Pin PDIP

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

74LS Family Decoders/Multiplexers, Texas Instruments

Texas Instruments range of Decoders, Multiplexers and Demultiplexers from the 74LS Family of Low Power Schottky Logic ICs. The 74LS Family use bipolar junction technology coupled with Schottky diode clamps to achieve operating speeds equal to the original 74TTL family but with much lower power consumption.

74LS Family

Specificaties
Kenmerk Waarde
Logic Family LS
Logic Function Decoder, Demultiplexer
Demultiplexing Capability 1-of-10
Number of Elements per Chip 1
Polarity Inverting
Mounting Type Through Hole
Package Type PDIP
Pin Count 16
Dimensions 19.3 x 6.35 x 4.57mm
Height 4.57mm
Length 19.3mm
Maximum Operating Supply Voltage 5.25 V
Minimum Operating Temperature 0 °C
Minimum Operating Supply Voltage 4.75 V
Width 6.35mm
Maximum Operating Temperature +70 °C
25 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Tube of 25)
1,714
(excl. BTW)
2,074
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
25 +
1,714 €
42,85 €
*prijsindicatie
Related Products
Supply Voltage Range from 4.5 V to 5.5 ...
Description:
Supply Voltage Range from 4.5 V to 5.5 V±8 mA Output Drive at 5 VCMOS low power consumption.
I²C, pronounced I-squared-C, stands for Inter-Integrated Circuit. This ...
Description:
I²C, pronounced I-squared-C, stands for Inter-Integrated Circuit. This two-wire interface is a multi-master, multi-slave, single-ended, serial computer bus. SMBus is a subset of I²C.
Signal-Switch logicOperating voltage: 2.3 to 3.6Compatibility: Input TTL, ...
Description:
Signal-Switch logicOperating voltage: 2.3 to 3.6Compatibility: Input TTL, Output TTLLatch-up performance exceeds 250 mA per JESD 17.
The 74HC238: 74HCT238 decodes three binary weighted address ...
Description:
The 74HC238: 74HCT238 decodes three binary weighted address inputs (A0, A1 and A2) to eight mutually exclusive outputs (Y0 to Y7). The device features three enable inputs (E1 and E2 and E3). Every output will be LOW unless E1 and ...