Applied Motion Systems STM Series Dual Hybridge Stepper Motor, 0.88Nm Torque, 12 → 70 V, 1.8°, 23mm Frame,
- RS-stocknr.:
- 877-7234
- Fabrikantnummer:
- STM23S-2AN
- Fabrikant:
- Applied Motion Systems
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 17/06/2024, met een levertijd van 2 à 3 werkdagen.
Toegevoegd
Prijs Per stuk
€ 477,67
(excl. BTW)
€ 577,98
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 + | € 477,67 |
- RS-stocknr.:
- 877-7234
- Fabrikantnummer:
- STM23S-2AN
- Fabrikant:
- Applied Motion Systems
Datasheets
Wetgeving en conformiteit
- Land van herkomst:
- US
Productomschrijving
Integrated Steppers STM23S
The STM23S is an integrated Drive and Motor, fusing step motor and drive technologies into a single device, offering savings on space, wiring and cost over conventional motor and drive solutions.
Drive + Motor + Control in one unit
4 quadrant controller
Dynamic Current Control
Anti-Resonance
Torque Ripple Smoothing
Microstep Emulation
Stall Prevention/Detection
NEMA 23 frame size
Input voltage 12-70 Vdc
3 digital input, 1 analog input
1 digital output
RS232 interface
Operation Mode:
Step and direction
CW/CCW pulse
A/B quadrature pulse
velocity (oscillator, joystick)
streaming commands (SCL)
SiNet Hub compatible
Applied Motion Systems - Stepper Motor
Specificaties
Kenmerk | Waarde |
|---|---|
| Stepper Motor Type | Dual Hybridge |
| Step Angle | 1.8° |
| Holding Torque | 0.88Nm |
| Number Of Wires | 8 |
| Supply Voltage | 12 → 70 V |
| Frame Size | 23mm |
| Shaft Diameter | 6.35mm |
| Current Rating | 5 A |
| Shaft Length | 18.4mm |
| Depth | 92.4mm |
| Output Speed | 200 → 51200 spm |
| Standards Met | CE EN61800-3:2004, RoHS Compliant |
| Series | STM |
- RS-stocknr.:
- 877-7234
- Fabrikantnummer:
- STM23S-2AN
- Fabrikant:
- Applied Motion Systems