Maxon, DC Motor Controller, Voltage Control, 12 → 30 V dc, 2 A, Flange Mount

  • RS-stocknr. 445-0162
  • Fabrikantnummer 250521
  • Fabrikant Maxon
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CH
Productomschrijving

LSC 30/2

Linear servo control amplifier used to control motors up to 50W
Suitable for a wide range of motors including the Maxon RE36 and A-Max 32
4 quadrant operation
5 operating modes , (IxR, voltage regulation, digital encoder, dc tacho, current control)
External DIP switch setup, potentiometer mode adjustment
LED status indication
Rack mounting

Specificaties
Kenmerk Waarde
Supply Voltage 12 → 30 V dc
Current Rating 2 A
Voltage Rating 60 V dc
Compatible Motor Type Permanent Magnet
Control Input Voltage
Mounting Style Flange Mount
Length 103mm
Width 100mm
Depth 34mm
Dimensions 103 x 100 x 34 mm
Operating Temperature Range 0 → +45 °C
3 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
12 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
310,75
(excl. BTW)
376,01
(incl. BTW)
Aantal stuks
Per stuk
1 +
310,75 €
Related Products
This range of cost effective low voltage dc. ...
Description:
This range of cost effective low voltage dc. motor controllers are suitable for use with permanent magnet dc. motors up to 12A. The boxed version is protected to IP22.,Comprehensive instruction sheet supplied. Adjustable maximum and minimum speedsIR compensationAdjustable overloadFused input ...
The 514C range of isolated dc motor speed ...
Description:
The 514C range of isolated dc motor speed controllers provide fully regenerative (four quadrant) control of dc shunt and permanent magnet motors. They are particularly suitable for overhauling load applications or where accurately controlled braking is required. Fully regenerative, four-quadrant ...
Suitable for permanent magnet and wound field dc ...
Description:
Suitable for permanent magnet and wound field dc motorsSupply 12 or 24Vdc battery or linear power supplyContinuous rating 24A, maximum current limited to less than 36AAdjustable electronic current limit up to 36ASpeed control by potentiometerSoft startHeatsink thermally protectedRunning/Fault/Trip ...
The motor drive is a PWM-based DC-motor driver. ...
Description:
The motor drive is a PWM-based DC-motor driver. The materials and features meet the industrial environment requirements. The device is CE marked and has been tested through EMC measurements required by industrial environment.Motor voltage is regulated against supply voltage changes, ...