DOGA, 12 V dc, 4 Nm DC Geared Motor, Output Speed 285 rpm

  • RS-stocknr. 181-6491
  • Fabrikantnummer 317.9706.2B.00
  • Fabrikant DOGA
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: ES
Productomschrijving

The DOGA 317H series comprises of a permanent magnet DC motor with worm gearbox developed for a compact, low noise and cost effective solution to suit many applications. Also integrated in to the motor are hall effect sensors offering up to 310ppr (1.16° accuracy) of the output shaft for feedback on speed, direction and position of the motor. Standard supply voltages are 12 or 24Vdc that can be supplied from a battery or power supply unit, with nominal output torque up to 4Nm and starting torque up to 12Nm the geared motor is suitable for applications that need high power at start-up. Output speed up to 25rpm, a DC motor controller can be used with this motor if variable output speed control is required. Protected against dust ingress and an EMC filter is available as standard on all articles for limiting electrical interference. The standard worm gear wheel is made from hardened plastic offering low noise and good performance.

Application
Agriculture
Building access
Care aid
Medical
Office equipment
Marine
General industrial automation

Specificaties
Kenmerk Waarde
Output Speed 285 rpm
Supply Voltage 12 V dc
Maximum Output Torque 4 Nm
Shaft Diameter 48mm
Gearhead Type Worm
Length 51mm
Width 177.5mm
Depth 90.8mm
Dimensions 51 x 177.5 x 90.8 mm
Current Rating 2.5 A
Series 317H
Gear Ratio 62:1
1 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
179,40
(excl. BTW)
217,07
(incl. BTW)
Aantal stuks
Per stuk
1 +
179,40 €
Related Products
This miniature gearbox is of steel and brass ...
Description:
This miniature gearbox is of steel and brass construction with brass gears and is mounted on a 1mm thickness steel bracket. It incorporatesa high quality three pole motor with sleeved bearings. The design and construction of the unit make it ...
A range of Crouzet DC motors from the ...
Description:
A range of Crouzet DC motors from the 82 862 series with a maximum output torque of 0.5 Nm and a power range of 3 W. These geared motors are particularly suitable for use in applications such as valves, pumps, ...
Series of geared motors for applications requiring slow ...
Description:
Series of geared motors for applications requiring slow speed and compact size.The VDR system minimises electrical interference.Power supplied via wires.Available in two voltages: 6 Vdc and 12 Vdc.
DC motors are most commonly used in variable ...
Description:
DC motors are most commonly used in variable speed and torque applications. The range of IP 53 Doga DC motors are powered by direct current from a battery or DC power supply. Worm gears are used when large gear reductions ...