Other, AS8510-ASSM SSOP20 LF T

  • RS-stocknr. 200-6329
  • Fabrikantnummer AS8510-ASSM
  • Fabrikant ams
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: AT
Productomschrijving

The ams AG 20 pin of data acquisition device for battery sensor has provide virtually offset free, low noise, two channel measurement device. In this analogue to digital conversion and digital filtering, the resulting
16-bit digital word are accessible through 4-wire standard serial interface. It has programmable sampling to enable data throughputs from less than 1Hz to 8kHz.

Zero Offset for both channels
Ambient temperature operation in -40°C to +125°C
AEC - Q100 automotive qualified

Specificaties
Kenmerk Waarde
Number of ADCs 2
Number of DACs No DACs / 2 ADCs
Resolution 16 bit
Signal to Noise Ratio 90dB
Maximum Settling Time 2000µs
Package Type SSOP
Pin Count 20
500 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
8,77
(excl. BTW)
10,61
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
8,77 €
10 - 49
8,02 €
50 - 99
7,11 €
100 - 249
6,28 €
250 +
5,80 €
Verpakkingsopties
Related Products
Linear Technology broad range of general purpose successive ...
Description:
Linear Technology broad range of general purpose successive approximation register (SAR) analog to digital converters (ADC) complete with 10-bit resolution have sample rates up to 5Msps. The SAR ADC provides a single channel or multiplexed as well as simultaneous sampling ...
The Analog Devices AD5592R and AD5593R are ADCs ...
Description:
The Analog Devices AD5592R and AD5593R are ADCs and DACs Coverter Combinations for general system monitoring in Industrial Applications.APPLICATIONSControl and monitoringGeneral-purpose analog and digital input/output. FEATURES8-channel, configurable ADC/DAC/GPIOConfigurable as any combination of 8 ´ 12-bit DAC ...
BU92001KN has the encode / decode function of ...
Description:
BU92001KN has the encode / decode function of IrDA SIR. It has a built-in baud rate generator. The baud rate can be generated by the internal register. The data between UART and IrDA can be encoded and decoded by connecting ...
Converts serial data from UART bitstreams to IrDA ...
Description:
Converts serial data from UART bitstreams to IrDA standard bitstreams (encodes) and from IrDA standard bitstreams to UART bitstreams (decodes). Requires input clock that is 16x needed baud rate. Additional Feature: Pinout compatible with HSDL-7000Compliant with IrDA® Standard Physical Layer ...