Phoenix Contact SUBCON-PLUS Series 2.77mm Pitch 9 Way Right Angle Male Screw Terminal D-sub Connector

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Phoenix Contact SUBCON-PLUS PROFIBUS D-Sub Connectors

Phoenix Contact SUBCON-PLUS PROFIBUS 9 pin D-sub connectors are designed for use in PROFIBUS systems up to 12 Mbps allowing fast connection of incoming and outgoing bus cables under field conditions. These SUBCON-PLUS PROFIBUS d-sub connectors have an integrated terminating resistor which can be activated externally by a slide switch, surge protection, a shielded ABS housing and can all be used with standard PROFIBUS cables with an outside diameter of 8mm (type A & B)

For PROFIBUS cable quick stripping tool see stock number 801-8967
For cable stripping tool see stock number 803-4326
For screwdriver see stock number 803-4351

SUBCON-PLUS-PROFIB/SC2

A right angled, D-SUB connector from Phoenix Contact. The 9-contact connector is part of the SUB-CON PLUS series and has a termination resistor that can be connected/switched on through the slide switch.
Designed for using in the PROFIBUS and CAN systems the shielded connector ensures a maximum transmission rate.

Features and Benefits

• 35° angled cable entry and an internal connection unit which can be turned around enabling cable insertion from the left or the right and a screw connection
• 9 Copper alloy contacts
• Pitch of 2.77mm
• Metal plated ABS housing
• Operating temperature of -20°C to +75°C
• Shock and vibration resistance according to EN 50155

BUS connectors

Rewireable bus interface connectors suitable for Bitbus, CAN-Bus, Interbus-S (Fieldbus) and Profibus systems. Compact and high quality, the 9-pole sub-D housings are available in bus node or bus termination versions and are colour-coded for easy identification. Service nodes are also available for CAN-Bus and Profibus systems, allowing online programming and repair. Each interface comes with detailed assembly instructions and mounting accessories.

Available in versions with horizontal or vertical cable outlets
Fast and reliable connection via screw terminals on the PCB
Bus terminations include SMT termination resistors
Colour-coded bodies aid installation and repair
Safe ESD protection thanks to fully insulated housings
Supplied with reliable crimp strain relief

Specificaties
Kenmerk Waarde
Number of Contacts 9
Gender Male
Body Orientation Right Angle
Mounting Type Cable Mount
Pitch 2.77mm
Termination Method Screw Terminal
Current Rating 1.0A
Housing Material Metal Plated ABS
Voltage Rating 60.0 V
Length 58.0mm
Width 39.4mm
Depth 16.6mm
Maximum Operating Temperature +75°C
Minimum Operating Temperature -20.0°C
Contact Material Copper Alloy
Series SUBCON-PLUS
7 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
37,45
(excl. BTW)
45,31
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
37,45 €
10 - 24
37,44 €
25 - 49
37,42 €
50 - 99
37,41 €
100 +
37,40 €
Related Products
Compatible with MIL 24308 connectorsHigh reliability and military ...
Description:
Compatible with MIL 24308 connectorsHigh reliability and military performanceLow contact resistanceMonobloc moisture resistantHigh temperature withstand insulatorCable/panel mount versions illustratedOriginal D also available in straight and 90° PCB versionsFor suitable hole cutters see stock no. 477-8690.
Grey polyester insulator to UL94-V0 with gold over ...
Description:
Grey polyester insulator to UL94-V0 with gold over nickel plated contacts in a metal shell. Fit to Speedbloc® ribbon cable for end termination or daisy chaining.
For higher densities of circuit tracks and reduced ...
Description:
For higher densities of circuit tracks and reduced termination grid patterns. The 0.075 inch pitch Micro D connector significantly reduces connector size and weight. They share the same high performance components used in the rest of the Mil-PRF-83513 approved Micro ...
A range of D-sub IDC Plugs and Sockets ...
Description:
A range of D-sub IDC Plugs and Sockets from MH Connectors with 9, 15, 25 and 37 ways respectively:Plugs with 3.1 mm diameter holes: 821-2857 , 821-2850 , 821-2854 , 821-2863 Plugs with UNC 4-40 Cinch Nuts: 821-2866 , 821-2860 ...